(Front of case / SATA ports facing left)+-----+-----+-----+-----+-----+ | | | | | | | 10 | 9 | 8 | 7 | 6 | <-- Row 2 (closest to board edge) | | | | | | +-----+-----+-----+-----+-----+ | 5 | 4 | 3 | 2 | 1 | <-- Row 1 (inner row) +-----+-----+-----+-----+-----+
Summary: this document describes the front-panel connector, signals, pinout, LEDs, switches, common troubleshooting steps, and wiring recommendations for motherboards labeled iPSiB‑VR Rev 1.01 (Acer laptops/mini-PCs that use this board). Use this as a practical reference for repair, modding, or replacement front-panel assemblies. Assume your board is labeled Rev 1.01; variations may exist between batches — verify against the board silkscreen and multimeter before powering. acer ipisb-vr rev 1.01 front panel
Warning: working on motherboards can damage components or cause injury. Disconnect power, remove battery (if applicable), and ground yourself to avoid static discharge. (Front of case / SATA ports facing left)
[Pin 1] [Pin 2] [Pin 3] [Pin 4] [Pin 5] HDD+ HDD- PWR+ PWR- GND | | | | | o o o o o
o o o o (key) [Pin 6] [Pin 7] [Pin 8] [Pin 9] [Pin 10] RST+ RST- PLED+ PLED- N/ABecause this board is dual-purpose (OEM and retail
Because this board is dual-purpose (OEM and retail standards), ensure no extra brass standoffs are touching the back of the PCB under the front panel area.