Skadden, Arps, Slate, Meagher & Flom LLP and Affiliates

Bq Firmware Flash Tool Windows 10 May 2026

If you skip this, Windows 10 will refuse to install the BQ/Intel/MediaTek USB drivers, and your device will appear as “Unknown USB Device (Device Descriptor Request Failed).”

How to do it:

Warning: This setting resets after a normal reboot. Only perform flashing procedures immediately after following these steps. bq firmware flash tool windows 10

  • Concurrency:
  • File formats:
  • Device DB:
  • Safety:
  • Testing:

    • For phones like the BQ Aquaris U or BQ Mobile BQS-5070.

  • Click “Options” > “USB Speed” > Set to “High Speed” (not Full Speed).
  • Power off your BQ device completely (remove battery if possible, or wait 30 seconds after shut down).
  • Click the big green “Download” button in SP Flash Tool.
  • Now connect the powered-off BQ phone to the Windows 10 PC via USB.
  • SP Flash Tool should immediately detect the device (a red bar will appear, then purple, then yellow). This means the Preloader / BROM mode is working.
  • Wait for the yellow bar to complete. Once a green checkmark appears, you’re done.
  • Disconnect and boot the device.
  • Prepare the BQ device:
  • Back in the Intel Flash Tool, click “Start Flashing” .
  • Wait for the progress bar to reach 100%. You will see individual partitions (gpt, bootloader, droidboot, system, etc.) being written.
  • Upon completion, the tool will say “Flash completed successfully” . Disconnect and reboot (first boot may take 5–10 minutes).

    • Important: Do not plug your phone in yet. If you skip this, Windows 10 will refuse

    Here’s a step-by-step guide for using a BQ firmware flash tool on Windows 10.

    Note: “BQ” often refers to BQ Aquarius tablets/smartphones (a Spanish brand) or BQ Linux-based devices (like the BQ Ubuntu phones).
    The tool varies by device. Below is a general guide covering the most common scenarios. Warning: This setting resets after a normal reboot

  • SP Flash Tool: The Windows software that writes the firmware to the phone.
  • MTK VCOM Drivers: Windows 10 requires specific drivers to recognize the phone when it is switched off.
  • A Good USB Cable: Preferably the original one.

    • Even with correct steps, things go wrong. Here are the top 5 errors reported by BQ users on Windows 10.

    After successfully using the BQ firmware flash tool, perform these final checks: