Our new tool lets you make amazing Windows styles.
It's simple, free and without ads.
Your BX60 doesn’t need much, but a little care extends its life.
Casual users charging standard 12V lead-acid car or motorcycle batteries. Not for lithium or professional shop use.
Before plugging in your Bradex BX60, it is critical to identify each part of the unit. Inside the standard packaging, you should find:
Key Features on the Control Panel:
Important Note: The Bradex BX60 is not suitable for 6V batteries, lithium (LiFePO4) batteries unless specifically labeled, or non-rechargeable batteries. Attempting to charge incompatible battery types can cause fire or explosion.
Having access to a complete, accurate Bradex BX60 battery charger manual is the difference between a safely charged battery and a damaged one—or worse, a garage fire. By following the connection order, selecting the right mode, respecting error codes, and performing basic maintenance, you will maximize both the life of your batteries and the charger itself. bradex bx60 battery charger manual
Remember: The BX60 is a smart charger, but it still relies on a smart user. Keep this guide bookmarked (or print it out) and place it near your charging station. When in doubt, default to the five golden rules:
If you need further support, Bradex customer service is available via their official website or helpline (check your local warranty card). For lost manuals, this article serves as your definitive replacement.
Charge smart, charge safe – with your Bradex BX60.
Disclaimer: This article is a user-generated comprehensive guide. Always refer to the original printed or digital manual provided with your specific Bradex BX60 model for region-specific electrical ratings and safety certifications.
The Bradex BX60 is a 12V 4A battery charger designed for standard lead-acid car batteries Your BX60 doesn’t need much, but a little
. It is characterized by its simple, analog design featuring a built-in ammeter for monitoring charge progress and double-insulated protection, which removes the need for a separate earthing wire. Tayna Batteries Quick Setup Guide Preparation
: Ensure the battery terminals are clean and the vehicle’s accessories (lights, radio) are turned off. Connect Clips Attach the positive lead to the positive battery terminal. Attach the negative lead to the negative battery terminal. : Plug the charger into a standard AC wall outlet.
: The analog ammeter needle will move to show the charging current. As the battery fills, the needle will slowly drop toward zero. Disconnect
: Once charged, unplug the unit from the wall first, then remove the black clip followed by the red clip. Tayna Batteries Safety Features & Precautions Protection
: The unit includes built-in safeguards against short circuits, reverse polarity (connecting clips to the wrong terminals), and thermal overload. Ventilation Casual users charging standard 12V lead-acid car or
: Always charge batteries in a well-ventilated area to prevent the buildup of explosive gases. Maintenance
: If the charger fails to power on, check the "flat" blade car-type fuse located on the base of the charger and replace it if it has blown. Tayna Batteries Troubleshooting Potential Cause No needle movement Poor terminal contact
Re-seat the crocodile clips to ensure they bite into the metal. Charger not working Blown fuse Replace the blade fuse at the bottom of the unit. Needle stays high Deeply discharged or faulty battery
A high reading for a long period suggests a battery that can no longer hold a full charge. how to test your battery’s health using a multimeter before charging? Bradex BX60 Battery Charger 12V 4A
The Bradex BX60 is a compact, microprocessor-controlled battery charger designed for 12V lead-acid and maintenance-free batteries. Its manual serves not just as safety instructions but as a guide to maximizing battery life. Here are the key features as outlined in the official documentation.