L10577 | Canon

Since "Canon L10577" will not appear in Canon’s driver database, you must identify your actual model. Here is how to locate the real model number:

  • Check your USB cable label: Sometimes the printer identifies itself to Windows as "Canon L10577" if the USB descriptor is corrupted. Go to Control Panel > Devices and Printers – right-click the generic icon and select "Properties" to see the hardware IDs.

    • Once you have the correct model (e.g., MF3010, LBP6030), download drivers from the official Canon support site:

    If you have tried the reset procedure and replaced the fuser (L10577 part) but the error persists, the problem may be: canon l10577

    In these cases, the repair cost often exceeds the value of the printer. A new Canon imageCLASS MF3010 or MF260 series printer costs between $120–$180. Professional repair for a logic board can run $150–$250.

    Set your multimeter to Continuity (beep mode). Touch the probes to both ends of the fuse. Since "Canon L10577" will not appear in Canon’s

    Step 1: Hard Reset

    Step 2: Clear the Error via Service Mode (For imageCLASS MF3010) If the reset fails, enter service mode: Check your USB cable label: Sometimes the printer

    Step 3: Replace the Fuser Assembly (If the part number is L10577) If your research shows that L10577 is the replacement fuser part for your printer, you will need to replace it. This is a moderate-to-difficult repair.

    Tools needed:

    Replacement steps:

    Warning: The fuser contains a heating lamp. Handle it by the metal edges only. Oils from your fingers can create hot spots on the lamp, causing premature failure.