Canopus U13-pc-211 Driver (2026)

The U13-PC-211 connects exclusively via a 6-pin FireWire 400 cable.

When Windows Device Manager displays "U13-PC-211" (or a derivative like USB\VID_1B80&PID_E310), it indicates the system has detected a USB video capture interface but lacks the specific software driver to name it correctly.

Likely Physical Device: Despite the "Canopus" search query, the device is most likely a Roxio Easy VHS to DVD 3 or a Roxio Game Capture HD device. Canopus produced high-end capture cards (like the ADVC series) which used different FireWire/PCI chipsets. The U13 identifier is specific to the consumer-grade USB capture market.

If you are looking for a driver download for U13-PC-211, stop looking—it does not exist. Focus your efforts on ensuring your computer has a working FireWire port and that you have installed compatible video capture software (like WinDV). The device handles the encoding internally and streams the data over FireWire without needing system drivers.

Canopus U13-PC-211 (also commonly referred to as the Grass Valley ADVC-110

or related ADVC series) is an external high-quality Analog-to-Digital video converter. Because it uses the IEEE 1394 (FireWire)

interface, it technically does not require proprietary "drivers" in the traditional sense, as it utilizes the standard FireWire drivers built into your operating system. canopus u13-pc-211 driver

Follow this guide to set up and troubleshoot your Canopus device: 1. Hardware Connection Interface:

Connect the device to your computer using a FireWire cable (6-pin to 6-pin or 6-pin to 4-pin, depending on your port).

If using a 6-pin FireWire port, the device is usually bus-powered. If using a 4-pin port (common on laptops) or a Thunderbolt-to-FireWire adapter, you must use an external 5V DC power supply. Switch Settings:

Ensure the DIP switches on the bottom are set correctly. For most North American users (NTSC), Switch 6 should be . For European users (PAL), it should be 2. Software Recognition (Windows 10/11)

Windows often struggles with modern FireWire drivers. If your device isn't showing up in capture software, you may need to switch to the "Legacy" FireWire driver Device Manager IEEE 1394 Host Controllers

Right-click your controller (e.g., OHCI Compliant Host Controller) and select Update Driver Browse my computer for driver software Let me pick from a list 1394 OHCI Compliant Host Controller (Legacy) and click Next. If "Legacy" is not listed, you may need to download the FireWire Legacy Driver Installer from Microsoft. 3. Video Capture Setup The U13-PC-211 connects exclusively via a 6-pin FireWire

Once the hardware is recognized, use a compatible capture program to pull the video: WinDV (Recommended):

A lightweight, free tool specifically for DV capture that works well with Canopus hardware. OBS Studio:

Can recognize the device as a "Video Capture Device" if the FireWire connection is active. Adobe Premiere / Vegas Pro: Set the capture format to to recognize the incoming signal. 4. Troubleshooting Common Issues Device Not Found:

Check if the "Status" LED on the front of the Canopus is lit. If it’s flashing or off, the device isn't receiving enough power or a valid signal. No Video Signal:

Ensure your analog source (VCR/Camcorder) is playing and cables are connected to the "In" ports on the Canopus, not the "Out" ports. Dropped Frames:

FireWire capture is data-intensive. Avoid using other high-bandwidth USB devices on the same bus during capture. DIP switch configurations for a particular video format like PAL or NTSC? Canopus ACEDVio Drivers Download - Solvusoft When Windows Device Manager displays "U13-PC-211" (or a

Because Canopus (now part of Grass Valley, which later became Belden Inc.) no longer hosts these drivers, you must rely on archive sites and community repositories.

Safe sources (as of 2025):

Specific driver filenames to look for:

Warning: Avoid "driver downloader" tools that claim to auto-find this driver. They are typically malware vectors. No universal EXE will magically solve this.

The driver for the U13-PC-211 chipset is proprietary and bundled with the capture software.

If you have the .inf and .sys files but Windows refuses to install: