Fsx Fs2004 Flight1 Fokker 70 100 Service Pack 2 20 Fixed Official
Early versions suffered from aggressive pitch oscillations during altitude capture. The v2.20 update completely rewrote the pitch PID (Proportional-Integral-Derivative) controller. Now, the Fokker captures FL190 smoothly without turning your passengers’ stomachs.
The Fokker 100 is a heavy bird with big engines, while the F70 is lighter and sportier.
Pros:
Cons:
Final Score: 9/10 (For its era) If you are flying FS2004 for nostalgia or performance reasons on older hardware, the Flight1 Fokker 70/100 Service Pack 2 is an essential addition to your hangar. It represents the peak of what was possible in that simulator.
Service Pack 2 transforms the Flight1 Fokker from a good addon into a great one. The autopilot and FMS fixes alone make it worth the download. Whether you’re flying regional hops in the 70 or the stretched 100, this is the definitive version for both FS9 and FSX.
Happy flying! ✈️
The Flight1/Digital Aviation Fokker 70/100 simulation for FSX and FS2004
received a significant update with Service Pack 2.20, which addressed critical system bugs and improved flight dynamics. This version is often cited as the definitive patch for "Early Adopters," refining the advanced systems simulation that took over four years to develop. Key Improvements in Service Pack 2.20
The update focused on stabilizing the complex AFCAS (Autopilot) and FMC (Honeywell software version 2A) systems to ensure they behaved reliably during critical flight phases. Autopilot & Flight Management:
Fixed issues with the AFCAS autopilot to provide smoother control inputs and more precise profile descents (VNAV).
Improved CAT III autoland performance, allowing for stable landings in crosswinds up to 30 knots with real rudder alignment.
Tuned the FMC (Strategic and Tactical modes) for better stability during SID/STAR transitions. System Refinements:
Corrected the electrical bus system simulation where lights and internal systems are now fed by specific, independent power sources. fsx fs2004 flight1 fokker 70 100 service pack 2 20 fixed
Enhanced the bleed air and hydraulic systems, specifically the interaction with auto-thrust to maintain bleed pressure during idle descents with anti-ice active.
Improved IRS simulation accuracy, featuring variable alignment times based on the aircraft's latitude. Performance & Visuals:
Fine-tuned Flight Dynamics (FDE) to better interpret joystick/yoke inputs, providing a more "weighty" and accurate feel.
Updated the Weather Radar with a more detailed ground reflection model.
Fixed landing and taxi light beams to move realistically along the ground surface. Version & Compatibility Notes
FSX Compatibility: The FSX version requires SP2 or the Acceleration Pack and is notably not compatible with DX10 preview mode in this release.
2D Focus: This specific service pack remains focused on the 2D panel configuration (Captain and First Officer views), as a full virtual cockpit (VC) was not included in the initial Digital Aviation release.
FSUIPC: The installer automatically handles the necessary FSUIPC (version 4 for FSX) installations required for advanced system communication. Flight1 Releases Fokker 70/100 - Fly Away Simulation
For enthusiasts of the Flight1 Digital Aviation Fokker 70/100
, maintaining the high-fidelity systems of this classic regional jet is essential. While Service Pack 1
provided critical initial refinements, subsequent updates and fixes have been released to address lingering stability and system logic issues. Fly Away Simulation
The following key areas are covered in the maintenance and fix cycle for the Flight1 Fokker 70/100: Flight Management & Avionics Fixes FMC Logic Refinements
: Updates addressed bugs in the Flight Management Computer (FMC) regarding approach speed displays and cap V sub m a end-sub Final Score: 9/10 (For its era) If you
(minimum maneuver speed) calculations on the Primary Flight Display (PFD) for the F70 variant. System Stability
: Critical fixes for Inertial System Display Unit (ISDU) crashes during specific system selections were implemented to prevent simulator CTDs (Crash to Desktop). Navigation & TCAS
: Enhancements to the Traffic Collision Avoidance System (TCAS) logic and fixes for single Distance Measuring Equipment (DME) tuning improved instrument flight reliability. Fly Away Simulation Aircraft Performance & Handling Enhanced Flight Dynamics (FDE)
: Improvements were made to the aircraft's behavior during flare and rudder affectivity, ensuring a more realistic landing experience. Autobrake & APU
: Behavior of the autobrake system was fine-tuned for smoother deceleration, and redundant APU status indications were removed for a cleaner interface. Fuel & Weight Metrics
: Support was added for the FMC to handle weight in pounds (lbs) and for barometric settings to handle inches of mercury (inHg), catering to broader international pilot preferences. Fly Away Simulation Operational & Visual Improvements Ground Operations
: The "Intercon Server" used for ground communication and multi-crew setups was updated to ensure compatibility for users on newer operating systems like Windows Vista and beyond. Model Corrections
: Minor graphical fixes were applied to the 2D panel and external engine cones to maintain the visual accuracy of the Rolls-Royce Tay engines. Automation
: The Virtual First Officer (F/O) logic was improved to ensure the landing gear is raised at the correct altitude ( AGL minimum) and rate of climb ( is greater than 500 f p m Fly Away Simulation
For users still operating these legacy simulators, ensure you have downloaded the latest installers from Flight1 Software to benefit from these cumulative service pack fixes. manually update your Fokker installation or information on the new professional version currently in development for modern simulators?
Flight1 / Digital Aviation Fokker 70-100 Service Pack 2 (SP2)
is the definitive update for the FSX and FS2004 versions of this advanced regional jet simulation. It addressed several long-standing system bugs and refined the aircraft's complex flight management systems. Fly Away Simulation Key Fixes and Features in SP2 (v2.20)
While version numbering sometimes varied between the installer and the internal DLL files (often cited as v2.20 or 2.0 fixed), the primary improvements include: FMC & LNAV/VNAV Stability you may need to:
: Refined tuning for approach speeds and more robust vertical navigation (VNAV) logic. FSX Integration
: Fixed issues with the aircraft appearing in FSX under Service Pack 2 and Acceleration environments. Autopilot Logic
: Corrected "hunting" behaviors in the autothrottle and flight mode transitions. Virtual Cockpit Fixes
: Although the "Early Adopters" version initially focused on 2D panels, SP2/v2.20 updates addressed compatibility for those using specific VC models and added fixes for rain effects. Performance Improvements
: General frame-rate optimizations for the complex gauge displays in both FS9 and FSX. Fly Away Simulation Legacy Support & Access Flight1 Library
: You can still find official registry and DLL repair tools at the Flight1 File Library
which are often necessary to get these older planes running on modern systems. Installer System : Modern installations usually require the Flight1 Agent
, which handles product authentication and library management for older titles. Flight1.com Comparison with "Project Fokker" It is common to confuse this with the freeware Project Fokker 70/100 v2
, which is a separate product for FS2004. That freeware version features its own maintenance animations (opening engine hoods) and specific panel updates but lacks the deep system depth of the Flight1/Digital Aviation release. Fly Away Simulation installation steps
for getting this aircraft running on a newer operating system?
The Fokker 70/100 v2.20 is arguably the most polished aircraft for FS2004. It maintains 60+ FPS on mid-range hardware. The only “fix” not included is native DX10 preview support—stick to DX9 for the full gauge visibility.
If you have purchased the Flight1 Fokker from their old store system (now replaced by Flight1 Software’s modern wrapper), follow this process:
Since Flight1’s official support for FS2004 is long gone, you may need to: