Gt005 Gps Tracker User Manual

The GT005 does not come with a dedicated app out of the box. Instead, you control it via text messages from an authorized phone number.

First, send this command to set yourself as the admin:

After sending this from your phone to the tracker’s SIM number, you’ll receive a reply: begin ok.

Based on the manual’s sparse “FAQ” section, here are real fixes:

| Problem | Likely Cause | Fix | | :--- | :--- | :--- | | “SMS command not working” | Wrong password or spaces | Send reset#123456# to factory reset | | No GPS location (only GSM) | Vehicle is indoors or metallic tint | Move tracker near windshield or under plastic bumper | | Tracker goes offline randomly | Poor power ground | Sand the ground metal contact point | | Receiving old location data | GPRS buffer not cleared | Send fix# command to force a fresh GPS lock |

(Provide complete device-specific syntax to match firmware — confirm actual command list from manufacturer.)

If you want, I can:

Comprehensive User Manual for the GT005 GPS Tracker The GT005 GPS Tracker is a compact, multi-functional tracking device designed primarily for vehicle security, fleet management, and anti-theft protection. Its small form factor allows for discreet installation in motorcycles, cars, and electric bikes.

This manual provides a detailed walkthrough for setting up, configuring, and troubleshooting your GT005 device. 1. Product Overview Gt005 Gps Tracker User Manual

The GT005 utilizes GPS, GSM, and GPRS technology to provide real-time location data. Key Features:

Real-time Tracking: Pinpoint location via SMS or web platform. ACC Detection: Monitors engine ignition status.

Vibration Alarm: Alerts you if the vehicle is moved or tampered with.

Geo-Fence: Notifies you if the vehicle enters or leaves a designated area.

Wide Voltage Range: Supports 9V to 36V, making it compatible with most vehicles. 2. Preparation and Installation

Before installing the device, ensure you have a standard GSM SIM card (Mini-SIM) with active GPRS data and SMS capabilities. SIM Card Installation: Open the back cover of the GT005. Slide the SIM card slot to the "Open" position. Insert the SIM card with the gold contacts facing down.

Lock the slot and ensure the internal battery switch (if equipped) is toggled to ON. Wiring Instructions:

The GT005 typically features a simple 2-wire or 3-wire harness: The GT005 does not come with a dedicated app out of the box

Red Wire: Connect to the positive terminal of the vehicle battery (+).

Black Wire: Connect to the negative terminal or chassis ground (-).

Orange Wire (Optional): Connect to the ACC/Ignition wire to monitor engine status.

Tip: Install the device in a hidden location (like behind the dashboard) with the top side facing the sky to ensure clear satellite reception. 3. LED Indicator Status The device has built-in LEDs to communicate its status: Blue LED (GPS Status): Flashing: Searching for GPS signal. Solid: GPS fixed/Locked. Green LED (GSM Status): Flashing: Searching for GSM network. Solid: GSM/GPRS connected. 4. Configuration via SMS Commands

You can control and configure the GT005 by sending specific SMS strings to the SIM card number inside the tracker. Command Format Check Location WHERE# Returns Google Maps link Set Admin Number CENTER,A,MobileNumber# CENTER,A,123456789# Check Status STATUS# Returns battery/GPS/GSM info Set APN APN,NetworkName# APN,internet# Reboot Device RESET# Restarts the tracker 5. Web and App Tracking To track your vehicle in real-time on a map:

Identify the Server: Check the sticker on the device box for the tracking website (often www.gps110.org or similar).

Login: Use the IMEI number (15 digits) found on the device as the username. Password: The default password is usually 123456.

Configuration: Ensure the APN is set via SMS so the device can upload data to the server. 6. Troubleshooting After sending this from your phone to the

Device Offline: Ensure the SIM card has credit/data and the device is powered on. Send STATUS# to check signal strength.

No GPS Signal: Ensure the device is not covered by metal. Test the device outdoors for the first fix.

Inaccurate Location: If the device cannot find a GPS signal, it may revert to LBS (Cell Tower) tracking, which is less accurate. 7. Safety Precautions Do not disassemble the device yourself. Keep the device away from extreme heat or moisture. Ensure all wiring is insulated to prevent short circuits.

Connect the device to a power source using the included USB cable.

The manual stresses this: The SIM card must have SMS capability, 2G GSM service, and GPRS data enabled. Disable the PIN code on the SIM before inserting.

Note: A micro SIM card with GPRS data and SMS capability is required (not included).

SIM card installation

Battery charging

Power on/off