How To Factory Reset Mibro Kids Z3 Best Info
This is the best way to reset the watch if you have access to the menus.
Ask yourself these three questions:
If you answered "Yes" to all three, you are ready to proceed.
To factory reset a Mibro Kids Z3 smartwatch, you can use several methods depending on whether you have access to the watch's interface or need to do it remotely. Before starting, ensure the watch is charged to at least 50% to avoid any software damage during the process. 1. Dial Code Method (Fastest)
If you can use the watch's touch screen, this is the most direct way: Wake the screen by pressing the Power button. Open the Dial application on the watch. Enter the code *#174714# using the keypad. Tap the Call button. Select Yes in the popup to confirm and begin the reset. 2. Settings Menu Method
Press the side button to wake the screen, then press it again to open the Menu. Scroll down and tap the Settings icon. Scroll to the bottom and select System Settings. Tap Factory Reset and then the checkmark to confirm. 3. Remote SMS Command Method
If you need to reset the watch from a distance, you can send an SMS command from the parent's phone paired with the watch:
Open your phone's Message app and start a new conversation with the phone number assigned to the watch's SIM card. Send one of the following commands (all lowercase): pw,123456,factory# pw,523681,factory#
If successful, the watch will reply with a confirmation like "factory ok, reset.." and begin the process. 4. Hardware Hard Reset If the watch is frozen or unresponsive:
Forced Restart: Press and hold the Power button for 10–15 seconds until it restarts.
Soft Restart: Simply hold the Power button until the device turns off, then hold it again to turn it back on.
Note: A factory reset will erase all personal data, custom settings, and installed applications, restoring the device to its original out-of-the-box state. Factory Reset MIBRO Kids Z3 - HardReset.info
To factory reset your Mibro Kids Z3 and restore all features to their default state, you can use several methods depending on whether you have access to the watch menu or a paired phone. Method 1: Dial Code (Directly on Watch)
This is the most direct way to perform a hard reset if you can access the watch's dial pad. Press the Power button to wake up the screen. Open the Dial application on the watch. Enter the code: *#174714#. Tap the Call button.
A popup will appear; tap Yes to confirm. The watch will begin the resetting process and restart automatically. Method 2: SMS Command (Remote Reset)
If you cannot access the watch menus but have a working SIM card inside, you can trigger a reset from a paired phone. Ensure the watch has a working SIM card and is powered on. On your paired smartphone, open your Message/SMS app.
Start a new conversation with the phone number of the SIM card inside the watch.
Type and send one of the following commands (all lowercase): pw,123456,factory# pw,523681,factory#
The watch should reply with "factory ok, reset..." and begin the process. Method 3: System Settings
If the watch is responding normally, you can reset it via the internal menu.
Wake the screen and press the Power button (or side button) to open the menu. Scroll down and tap on Settings. Navigate to System or System Settings. Select Factory Reset and tap the check mark to confirm. Method 4: Mibro Kids App
You can also initiate a reset through the management application. how to factory reset mibro kids z3 best
Open the Mibro Kids (or Mibro Fit) app on your paired phone. Go to the Equipment or Device tab.
Scroll to the bottom of the device settings and select Factory Reset. Confirm your choice.
Important Note: Ensure your watch has at least 30% battery before starting any reset method to prevent software corruption. A factory reset will erase all personal data, including contacts and step history.
Are you resetting the watch to fix a software bug or to pair it with a new phone?
How to Factory Reset Mibro Kids Z3: The Ultimate Guide to Restoring Your Device
The Mibro Kids Watch Z3 is a fantastic tool for keeping kids safe and connected, but like any smart device, it might occasionally need a "fresh start." Whether you’re dealing with a persistent software glitch, forgetting a passcode, or preparing to pass the watch down to a sibling, knowing how to perform a factory reset is essential.
In this guide, we’ll walk you through the best and safest ways to factory reset your Mibro Kids Z3, ensuring the process is smooth and your data is handled correctly. Why Factory Reset Your Mibro Kids Z3?
Before jumping into the "how," it’s important to understand the "why." A factory reset wipes all personalized data and returns the watch to its original out-of-the-box settings. You might need to do this if:
The watch is lagging: Over time, cached data can slow down performance.
Connection issues: If the watch won't sync with the Mibro Fit or Mibro Kids app.
Selling or Gifting: To ensure your child’s personal data and GPS history are removed.
Forgotten PIN: If the device is locked and you can’t bypass the screen. Method 1: The Best Way (Via the Watch Settings)
If the watch screen is responsive and you can navigate the menus, this is the most straightforward method.
Wake the Watch: Tap the screen or press the side button to light up the display.
Access Settings: Swipe through the apps until you find the Settings icon (usually represented by a gear).
Find System Options: Scroll down to find System or About Watch.
Select Factory Reset: Tap on Factory Reset (sometimes labeled as "Restore to Factory Settings").
Confirm: The watch will ask if you are sure. Confirm the action. The device will reboot, and the process will take 1–2 minutes. Method 2: Resetting via the Mibro Kids App
Since the Mibro Z3 is managed by a parent's smartphone, the app is often the best place to trigger a reset, especially if you want to unbind the device simultaneously.
Open the App: Launch the Mibro Kids app on the primary guardian’s phone.
Select the Device: Ensure the Z3 is the active device selected in the app. This is the best way to reset the
Go to Device Settings: Look for "More Settings" or "Watch Settings."
Unbind/Reset: Select the option to Unbind. In many versions of the software, unbinding the watch remotely will trigger a factory reset on the device itself to protect user privacy. Method 3: The "Hard Reset" (If the Watch is Frozen)
If your Mibro Z3 is stuck on a specific screen and won't respond to touches, you may need to force a reboot before attempting a reset.
Long Press: Hold the power button (side button) for at least 10–15 seconds.
Restart: This forced restart often clears temporary glitches. Once the watch reboots, try Method 1 again. Crucial Tips Before You Reset
Battery Check: Ensure the watch has at least 50% battery or is plugged into its charger. If the watch dies during a reset, it could "brick" the device (making it unusable).
Back Up Photos: If your child has taken photos with the Z3 camera, sync them to the app first, as a reset will delete them forever.
SIM Card: You do not need to remove the SIM card to reset the watch, but it won’t hurt to take it out if you are giving the watch to someone else. What to Do After the Reset
Once the reset is complete, the watch will display the "Welcome" or QR code screen. To get it running again: Open the Mibro Kids app on your phone. Scan the new QR code displayed on the watch face.
Re-configure the SOS contacts, safe zones, and school mode settings. Conclusion
Resetting your Mibro Kids Z3 is a quick fix for most technical headaches. By following the steps above, you can ensure your child's wearable stays fast, secure, and ready for their next adventure.
Are you having trouble pairing the watch back to your phone after the reset, or is the QR code not appearing?
To factory reset your Mibro Kids Z3 watch, you can use the dialer code or an SMS command from a paired phone. Method 1: Using the Dialer Code (Easiest)
This method is best if you have direct access to the watch and it is unlocked. Wake up the screen by pressing the Power button Dial application on the watch. Enter the following code: call button When the popup appears, tap to confirm and start the reset process. HardReset.info Method 2: Using SMS Command (Remote Reset)
Use this method if the watch is paired with a phone and has an active SIM card. Message app on the phone paired with the watch. Send a text to the watch's phone number. Type one of the following commands exactly as shown: pw,123456,factory# pw,523681,factory#
The watch should reply with "factory ok, reset..." and begin the process. Method 3: Using the Mibro Kids App
For most Mibro watches, you can also reset via the app settings. Mibro Kids App on your phone. Select your Mibro Kids Z3 from the device list. Device Management Scroll down to find the Factory Reset option and confirm. Ensure your watch has at least 50% battery
To factory reset your Mibro Kids Z3 , use the secret dialer code, which is the most direct method available. Ensure the watch has at least 30% battery before starting to avoid software damage. Method 1: Dial Code (Easiest) Wake the screen by pressing the Power button Dial application on the watch menu. Enter the secret code: Call button A confirmation popup will appear; tap to begin the reset. Method 2: SMS Command (Remote Reset)
If you cannot access the watch menu but it has a working SIM card paired with the Mibro Kids app , you can reset it remotely via text message: From the paired parent phone, open your SMS/Message app Start a conversation with the phone number of the SIM card inside the watch Send the following command (must be lowercase): pw,123456,factory# Note: if that doesn't work, try pw,523681,factory#
The watch should reply with "factory ok, reset.." and restart automatically. Method 3: Settings Menu Wake the screen and swipe to find the Settings icon (gear symbol). Scroll down to the bottom of the list to find Factory Reset Tap it and confirm by selecting the Check mark Troubleshooting: Frozen Watch If the watch is completely unresponsive, perform a Force Restart by holding the Power button 10–15 seconds until the screen goes black and the Mibro logo reappears. Are you resetting the watch to pair it with a new phone , or are you trying to fix a software glitch Factory Reset MIBRO Kids Z3 - HardReset.info
To factory reset a Mibro Kids Z3 smartwatch, the most effective methods involve using a specific dial code directly on the watch or sending a remote command via SMS from a paired smartphone. Before beginning, ensure the watch is charged to at least 30–50% to prevent it from shutting down mid-process, which could cause software errors. Primary Reset Methods Ask yourself these three questions:
Dial Code Method: This is the most direct way to trigger a reset on the device itself. Wake up the watch screen by pressing the Power button. Open the Dial (Phone) application on the watch. Enter the code *#174714# and tap the call icon. Confirm the reset by tapping Yes when the pop-up appears.
SMS Command Method: Useful if you need to reset the watch remotely or if the screen is unresponsive.
Ensure the watch has a working SIM card and is connected to the Mibro Kids application.
From your paired phone, send an SMS to the watch's phone number.
Type the command pw,123456,factory# or pw,523681,factory# (ensure all letters are lowercase).
The watch should respond with "factory ok, reset.." and begin the process. Alternative and Supportive Steps
Mibro Kids App: You can often initiate a reset or unpair the device through the Mibro Fit or Mibro Kids app on your smartphone. Look for the "Factory Reset" or "Unpair" option within the device settings menu.
Settings Menu: If the watch's interface is accessible, navigate to Settings > System (or System Operation) and select Reset.
Force Restart: If the watch is frozen but you don't want a full reset, hold the Power button for 10–15 seconds to force it to reboot. Hard Reset MIBRO Kids Z3
Warning: A factory reset will erase all data, settings, and content on your Mibro Kids Z3 smartwatch. Make sure to back up any important data before proceeding.
Method 1: Using the Smartwatch Settings
Method 2: Using the Mibro Fit App
Method 3: Using the Hardware Buttons (Forced Reset)
After the Factory Reset
Here’s a clear step-by-step guide to factory reset the Mibro Kids Z3 smartwatch, based on the most reliable method (via the watch’s settings).
The factory reset deleted all your emergency numbers. You must re-add them manually via the Mibro Fit app under Contacts > Add Contact. Only these contacts can call the watch, and the watch can only call them.
The Mibro Z3 usually uses a Nano SIM card. After a reset, you must re-enter the APN settings (Access Point Names) for mobile data.
If the watch is frozen, won't turn on, or you forgot the screen lock:
Rarely, a reset might not solve the problem. If your Mibro Kids Z3 is still acting up after a factory reset:
Use this method if you cannot access the settings menu or if the watch is malfunctioning.
