Hunta 145 Updated

| Problem | Likely Cause | Solution | |---------|--------------|----------| | No display | Dead battery / wrong position | Replace batteries; check rotary switch | | NCV beeps constantly | Sensor dirty or interference | Wipe tip; move away from fluorescent lights | | Inaccurate voltage | Low battery | Replace batteries (affects accuracy) | | No continuity beep | Probe not fully inserted | Push leads firmly into COM & VΩmA | | “OL” on screen | Overload or out of range | Select higher range (if manual) or check open circuit |

The most requested feature in the update is support for newer vehicles. The updated Hunta 145 now covers: hunta 145 updated

Previously, the Hunta 145 offered limited bi-directional tests (e.g., cycling fuel pumps or activating cooling fans). The hunta 145 updated version expands this to include: | Problem | Likely Cause | Solution |