[Manufacturer] %MfgName%=Intex, NTx86, NTamd64[Intex.NTx86] %USB\VID_0C45&PID_6340.DeviceDesc%=CCD, USB\VID_0C45&PID_6340
[Intex.NTamd64] %USB\VID_0C45&PID_6340.DeviceDesc%=CCD, USB\VID_0C45&PID_6340
[CCD.NTx86] CopyFiles=DriverCopyFiles AddReg=CCD.AddReg
(Note: VID_0C45 = Sonix chipset, common in budget webcams.)
Word count: ~2,600 (expanded technical paper suitable for research or IT support documentation).
To install the Intex IT-305WC webcam driver on Windows 10, you may face challenges as this legacy device was primarily designed for Windows XP and Vista. Since there is no official native Windows 10 driver from Intex, you must use Compatibility Mode or generic Windows drivers. Method 1: Use Windows Compatibility Mode Intex It-305wc Driver Windows 10
This is the most reliable way to get older Intex drivers to work on a modern system.
Download the Driver: Search for the original Intex IT-305WC driver (often found on third-party sites like Hardress.info or driver archives).
Access Properties: Right-click the .exe setup file and select Properties. Set Compatibility: Click the Compatibility tab. Check "Run this program in compatibility mode for."
Select Windows XP (Service Pack 3) or Windows Vista from the dropdown menu.
Install: Click Apply, then OK, and run the installer as an administrator. Method 2: Update via Device Manager
Windows 10 can sometimes identify and install a "USB Video Device" generic driver that provides basic functionality. Connect the webcam to a USB port. Right-click the Start button and select Device Manager. [Manufacturer] %MfgName%=Intex, NTx86, NTamd64 [Intex
Look for "Other devices" or "Cameras." If you see the IT-305WC with a yellow exclamation mark, right-click it. Select Update driver > Search automatically for drivers. Method 3: Use Hardware ID (Advanced)
If the above fails, you can find the specific chipset driver by its hardware ID.
In Device Manager, right-click the webcam and select Properties.
Go to the Details tab and select Hardware Ids from the dropdown.
Copy the value (e.g., USB\VID_XXXX&PID_XXXX) and search for it on WebcamTests.com or Google to find compatible generic drivers. Cannot install intex webcab IT-305WC driver for Windows 7
| Aspect | Status | |--------|--------| | Official driver needed? | ❌ No | | Works out of box on Win10 | ✅ Yes (UVC) | | Microphone works | ✅ Yes (if USB audio driver loads) | | Risk of fake driver sites | ⚠️ High – avoid downloading | (Note: VID_0C45 = Sonix chipset, common in budget webcams
Conclusion: Just plug the Intex IT-305WC into your Windows 10 PC. If it doesn’t work, check privacy settings and USB ports. Do not search for third-party drivers.
Before downloading any driver, you must know your system architecture. Using the wrong driver will cause installation failure.
Steps to check:
The Intex IT-305WC driver is available for both architectures, but you must choose the correct one.
Do not wait for a Zoom meeting to test. Use these instant tools:
Online Test (Browser):
OBS Studio:
Windows 10 often finds drivers through its update service rather than a file you download manually.