Makerbase Mks: Dlc V21 Manual Link
Most Voron builders pair the MKS DLC V2.1 with Klipper. In your printer.cfg, reference the manual to find the correct [mcu] pins. Example snippet:
[stepper_x]
step_pin: PE2
dir_pin: PE4
enable_pin: !PE3
microsteps: 16
rotation_distance: 40
All pin names in the manual match what Klipper expects. Cross-check the “MCU Pin Mapping Table” in the last pages of the PDF.
One of the most overlooked sections is the circuit schematic. If your board is not powering on or a heater fails:
"mks dlc v2.1" manual pdf github
or
site:github.com "MKS-DLC21" user manual
MakerBase occasionally releases minor revisions (e.g., V2.1a, V2.1b) with component changes. Do not rely on a single downloaded PDF. Instead:
The MKS DLC V21 can be a valuable addition to your 3D printing or CNC projects, offering enhanced control and monitoring capabilities. If you encounter any issues, don't hesitate to seek help from the community or directly from Makerbase support resources.
I couldn’t find an official manual link specifically for a Makerbase MKS DLC V21 — it’s possible the model name is slightly off (e.g., MKS DLC32 V2.1 is a common board).
If you meant MKS DLC32 V2.1 (a popular laser engraver/CNC control board), here’s what you’re likely looking for:
If you actually have a different board (e.g., MKS DLC V2.1 or MKS Robin, MKS SGEN), please double-check the silkscreen on the PCB. Let me know the exact version, and I can point you to the correct manual.
Here is the link to the Makerbase MKS DLC V2.1 manual (paper version reference) on the official GitHub repository:
https://github.com/makerbase-mks/MKS-DLC-V2.1/blob/master/MKS%20DLC%20V2.1%20User%20Manual.pdf
If you need the paper copy that originally came with the board, it is not available for separate purchase from Makerbase, but the PDF above matches that manual exactly. You can print it for a physical reference.
For additional files (pinout, firmware, schematics):
https://github.com/makerbase-mks/MKS-DLC-V2.1
The official manual and technical documentation for the Makerbase MKS DLC v2.1 (specifically the 32-bit
version) are primarily hosted on GitHub and specialized technical platforms. Official Documentation & Manuals MKS DLC32 V2.1 Wiring Manual makerbase mks dlc v21 manual link
: Provides a complete overview of power input, motor drive settings, and laser module connections. Download/View Manual (PDF via Solo Motor Controllers) MKS DLC32 V2.1 Wiring Manual (via Scribd) Full User Manual (GitHub)
: Contains configuration details, firmware update instructions, and terminal commands. MKS DLC32 Main GitHub Repository Hardware Schematics & Pinouts
If you need precise wiring diagrams or component layouts, use these direct links to the official hardware files: Wiring Diagram/Layout MKS DLC32 V2.1 Pinout and Wiring Guide Schematic (PDF) MKS DLC32 V2.1_003 SCH.pdf (GitHub) Pin Definitions MKS DLC V2.1 PIN.pdf (GitHub) Core Specifications MKS DLC32 v2.1 + TMC2209 drivers issue #483 - GitHub
The primary source for all documentation, wiring diagrams, and firmware for the MKS DLC v2.1 is the official Makerbase GitHub repository. Official Documentation: Makerbase MKS DLC GitHub
Wiring Diagram: Found in the hardware folder of the repository. Latest Firmware (GRBL): Available in the firmware section. 🛠️ Hardware Overview
The DLC v2.1 is an "all-in-one" board designed to run GRBL. It supports 3-axis control (X, Y, and Z) and features specific ports for laser TTL control and CNC spindles. Key Specifications Processor: ATMega328P (8-bit) Input Voltage: 12V to 24V DC Supported Drivers: A4988, DRV8825, TMC2208, TMC2209 Interface: USB for PC connection 🔌 Setup and Wiring Guide
Before powering on your board, ensure all connections are secure to avoid shorting the components. 1. Power Connection
Connect your DC power supply to the screw terminals. Double-check the polarity (+ and -) marked on the board. Most setups use 12V for lasers and 24V for CNC motors to get better torque. 2. Stepper Drivers
Insert your stepper drivers into the slots for the X, Y, and Z axes.
Direction: Ensure the "Enable" pin on the driver matches the "EN" pin on the board.
Jumpers: Place jumpers under the drivers to set your microstepping (usually all three jumpers are installed for 1/16 or 1/32 stepping). 3. Motor Wiring
Plug your 4-pin NEMA 17 stepper motors into the corresponding ports. If a motor spins in the wrong direction, you can flip the plug or change the direction in the GRBL settings ($3). 4. Laser or Spindle
Laser: Use the TTL/PWM port (usually 3-pin or 2-pin) to control laser intensity.
Spindle: Use the Spindle relay or PWM output to control your motor tool. 💻 Software Configuration Most Voron builders pair the MKS DLC V2
Since the MKS DLC v2.1 runs GRBL, it is compatible with a wide range of open-source software. Recommended Software LaserGRBL: The best free option for laser engraving.
LightBurn: Professional-grade paid software for laser cutting.
Universal Gcode Sender (UGS): Excellent for CNC milling and routing. Candle: A clean, simple interface for GRBL-based CNCs. Common GRBL Settings
Once connected via USB (usually at 115200 baud rate), you may need to adjust these settings in the console: $100, $101, $102: Steps per mm for X, Y, and Z. $32=1: Enable Laser Mode (if using a laser).
$22=1: Enable Homing (if you have limit switches installed). ⚠️ Troubleshooting Tips
Board not connecting? Ensure you have the CH340 driver installed on your computer.
Motors vibrating but not moving? Check your Vref on the stepper drivers; they might not be getting enough current.
Laser always on? Check if your $32 setting is correct and ensure the TTL wire is on the correct pin. If you need more specific help, I can guide you through: The exact jumper settings for your specific stepper drivers A step-by-step guide for configuring LaserGRBL How to wire limit switches to prevent crashes
The official manual and technical documentation for the Makerbase MKS DLC v2.1
(and the 32-bit DLC32 version) are primarily hosted on GitHub and specialist hardware sites. Official Manuals & Documentation MKS DLC v2.1 Hardware Resources : You can find the Hardware Pinout PDF Schematic Diagram directly on the Makerbase MKS-DLC GitHub repository MKS DLC32 v2.1 Manual : For the 32-bit version, a comprehensive Wiring Manual is available via Solo Motor Controllers User Guides
: Detailed overviews covering power input (12-24V), motor drivers, and laser/spindle connections can be viewed on Scribd's DLC32 Manual Essential Setup Links : GRBL firmware for the v2.1 board can be flashed using , while the DLC32 version uses specialized files from the MKS-DLC32 GitHub USB Drivers
: If your computer doesn't recognize the board, you likely need the CH340 Driver Wiring Guide
: A visual pinout guide for stepper motors (X, Y1, Y2, Z) and auxiliary ports is available on Are you setting this up for a laser engraver CNC router , and do you need help with the specific GRBL configuration MKS DLC32 V2 Wiring Manual - Solo Motor Controllers
MKS DLC32 V2 Wiring Manual. Page 1. 1. MKS DLC32 V2 Wiring Manual. Date：2021-12-24. Solo Motor Controllers MKS DLC32 V2.1 Pinout and Wiring Guide | PDF - Scribd All pin names in the manual match what Klipper expects
The Makerbase MKS DLC v2.1 is a GRBL-compatible control board designed for desktop CNC and laser engraving, featuring ESP32-based processing for offline and Wi-Fi capabilities. Official technical documentation, including the schematic, pinout, and firmware, is available on the Makerbase MKS-DLC GitHub repository FluidNC on MakerBAse MKS DLC32 V2.1
Makerbase MKS DLC V21 Manual: A Comprehensive Guide
The Makerbase MKS DLC V21 is a popular 3D printer control board used by makers and DIY enthusiasts. If you're looking for a manual or guide to help you get started with your MKS DLC V21, you've come to the right place.
What is the Makerbase MKS DLC V21?
The MKS DLC V21 is a 3D printer control board designed by Makerbase, a well-known company in the 3D printing community. The board is known for its reliability, ease of use, and flexibility.
Where to Find the Makerbase MKS DLC V21 Manual
You can find the official manual for the Makerbase MKS DLC V21 on the Makerbase website or on other online platforms. Here are a few links to get you started:
Key Features of the Makerbase MKS DLC V21
Here are some key features of the Makerbase MKS DLC V21:
Tips and Tricks
Here are some tips and tricks to help you get the most out of your Makerbase MKS DLC V21:
We hope this post helps you find the Makerbase MKS DLC V21 manual and get started with your 3D printing journey!
Since the manufacturer (Makerbase) does not host a dedicated, single-page HTML manual for the MKS DLC V2.1 on their website, the most helpful resource is the Official GitHub Repository.
Here is the direct link to the documentation and necessary files:
