Ms7860 Ver 12 Motherboard Specs [SAFE]
To help you identify if this article matches your motherboard, here are the HP products that used VER:12:
If your motherboard is from a different brand (Dell/Lenovo), this spec sheet does not apply.
The board uses the LGA 1155 socket. While it physically accepts Sandy Bridge (2nd Gen: i7-2600, i5-2400) and Ivy Bridge (3rd Gen: i7-3770, i5-3470), you must check the BIOS revision.
Note: Since the MS-7860 Ver 12 is an OEM board, exact specifications can vary depending on the original system builder (HP, Acer, etc.). Always verify with the specific PC model number (e.g., HP Envy 700-214) before purchasing upgrades.
is a proprietary Micro-ATX motherboard designed for HP ProDesk 400 G1 and G2 series desktops. It features the Intel H81 Express chipset and supports 4th generation Intel processors. Core Specifications Socket Type: LGA 1150
Chipset: Intel H81 Express (or Q85/H87 depending on specific model variant) Form Factor: Micro-ATX (mATX) Memory: 2x DDR3 DIMM slots Supports up to 16 GB (some variants report up to 32 GB) Speeds: 1300/1600 MHz CPU Compatibility
This board primarily supports 4th Gen Intel Core (Haswell) and 3rd Gen (Ivy Bridge) processors: Intel Core: i7, i5, i3 Pentium & Celeron: G-series Expansion & Storage Graphics: 1x PCI Express x16 slot
Expansion: 1x or 3x PCI Express x1 slots (varies by specific sub-model) SATA: 4x SATA ports for HDDs, SSDs, and optical drives I/O Connectivity HP MS-7860 Motherboard Manual | PDF - Scribd
The MS-7860 Ver 1.2 Go to product viewer dialog for this item.
is a specialized Micro-ATX (uATX) motherboard primarily found within the HP ProDesk 600 G1 SFF (Small Form Factor) and Tower series. Manufactured by MSI for HP, this board is designed for stability and professional business use, supporting the Intel 4th Generation "Haswell" architecture. Below is a comprehensive breakdown of the MS-7860 Ver 1.2
motherboard specs, performance capabilities, and upgrade paths. 1. Core Architecture and Chipset
The heart of the MS-7860 is the Intel Q85 Express Chipset. This chipset was built specifically for business environments, offering advanced manageability and security features that consumer-grade boards often lack. Socket Type: Intel LGA 1150 Chipset: Intel Q85 Express Form Factor: Custom Micro-ATX (Proprietary HP design) Bus Speed: 5 GT/s DMI2 2. CPU Compatibility
The MS-7860 supports a wide range of Intel 4th Generation Core processors. While it can physically house any LGA 1150 chip, it is optimized for the following: Intel Core i7: i7-4770, i7-4790 Intel Core i5: i5-4570, i5-4590, i5-4670, i5-4690 Intel Core i3: i3-4130, i3-4150, i3-4330 Pentium/Celeron: G3220, G3420, G1820 Max TDP: Generally supports up to 84W CPUs. 3. Memory (RAM) Specifications
One of the strengths of this motherboard is its four DIMM slots, which provide significant overhead for multitasking compared to standard two-slot budget boards. Memory Type: DDR3 / DDR3L (Low Voltage) SDRAM Slots: 4 x DIMM Speed: 1600 MHz (PC3-12800) Maximum Capacity: 32GB (4 x 8GB modules) Architecture: Dual-channel memory support 4. Expansion and Storage
Despite its compact size, the MS-7860 offers versatile expansion options for storage and dedicated graphics. PCI Express Slots:
1 x PCIe x16 (v3.0) – Ideal for low-profile GPUs like the GTX 1650. 3 x PCIe x1 (v2.0) – For Wi-Fi cards or extra USB ports. Storage Interface: 4 x SATA III (6.0 Gb/s) ports
Note: There is no native M.2 NVMe slot; an adapter is required for NVMe drives. 5. Rear I/O Ports ms7860 ver 12 motherboard specs
The rear panel is tailored for office productivity, featuring a mix of legacy and modern connections. USB Ports: 2 x USB 3.0 (Blue), 4 x USB 2.0 (Black)
Video Out: 2 x DisplayPort 1.2, 1 x VGA port (supports triple monitor setups with integrated graphics) Networking: 1 x RJ-45 (Intel I217LM Gigabit Ethernet) Audio: Line-in and Line-out (3.5mm jacks) Legacy: 2 x PS/2 ports for mouse and keyboard 6. Power and Installation Notes It is vital to note that the MS-7860 Ver 1.2
uses a proprietary HP power connector rather than the standard 24-pin ATX connector. Power Input: 6-pin main power and 4-pin CPU power.
Compatibility Warning: If you are moving this board to a standard PC case, you will likely need a 24-pin to 6-pin adapter cable to use a standard power supply.
Cooling: The board uses a standard 4-pin PWM header for the CPU fan, but the mounting holes are sometimes integrated into the HP chassis. 7. Performance Verdict MS-7860 Ver 1.2 is an older platform, it remains highly capable for:
Office & Productivity: With an i5 or i7 and 16GB+ of RAM, it handles modern web browsing and spreadsheets with ease.
Home Server/NAS: The four SATA ports and reliable Intel NIC make it an excellent choice for TrueNAS or a Plex Media Server.
Light Gaming: When paired with a low-profile GPU, it can play popular titles like Fortnite, Roblox, and Minecraft at 1080p.
Are you planning to upgrade the RAM or add a dedicated graphics card to this motherboard? Something went wrong and an AI response wasn't generated.
The MS-7860 Ver 1.2 motherboard Go to product viewer dialog for this item.
is an OEM system board manufactured by MSI specifically for HP desktop systems. It is most commonly found as the stock motherboard inside the HP ProDesk 400 G1, ProDesk 490 G1, and ProDesk 400 G2 Microtower (MT) PCs.
Because it is an OEM board, it features custom HP layouts and power connectors that differ slightly from standard off-the-shelf consumer parts. 🔧 Key Technical Specifications HP MS-7860 Motherboard Manual | PDF - Scribd
The MSI MS-7860 Ver 1.2 is a proprietary Micro-ATX motherboard designed by MSI specifically for HP desktop systems, most notably the HP ProDesk 400 G1 and G2 MT. Based on the Intel H81 Express chipset, this board serves as a durable, budget-friendly replacement or upgrade solution for workstations relying on 4th Generation Intel processors. It is known for its stability and compatibility, making it ideal for standard office work or light home-computing tasks. Core Specifications Processor Socket: LGA 1150 (Socket H3).
Processor Support: Compatible with 4th Gen Intel Core i3, i5, i7, Pentium, and Celeron processors. Chipset: Intel H81 Express.
Memory Support: Supports DDR3 or DDR3L memory, with 2 x DDR3 DIMM slots supporting speeds of 1066/1333/1600 MHz. Maximum Memory Capacity: Up to 16 GB DDR3. Form Factor: Micro-ATX (roughly 22.6 cm x 17.3 cm). Expansion and Storage
PCIe Slots: 1 x PCI Express x16 slot (gen 2) and 1 x PCI Express x1 slot.
SATA Ports: 2 x SATA 6Gb/s (SATA III) ports and 2 x SATA 3Gb/s (SATA II) ports. To help you identify if this article matches
USB Ports (Rear Panel): 2 x USB 3.0 ports, 4 x USB 2.0 ports.
Internal Headers: Support for front panel USB 2.0, front audio, and system fans. Graphics and Audio
Onboard Video: Supported (depends on CPU), typically featuring VGA and DVI or HDMI ports, depending on the specific HP sub-version (e.g., 786170-001 includes DisplayPort).
Audio: Realtek ALC887 Codec (7.1-Channel High Definition Audio). LAN: Realtek RTL8111G Gigabit Ethernet controller Go to product viewer dialog for this item. Key Features
Military Class 4 Components: Includes high-quality capacitors and chokes to ensure stability and extended lifespan.
OC Genie 4: Features a one-second overclocking function designed to boost performance.
Fast Boot: Optimizes the boot process to launch the operating system faster.
This motherboard is primarily found in refurbished, "tested working" condition, often sold to repair existing HP 400 G1/G2 systems that require a replacement board to keep the LGA 1150 platform running. If you're using this for a repair, let me know:
What is the HP part number (e.g., 718413-001) printed on your board? What CPU are you planning to use? I can confirm specific compatibility for your upgrade.
Original MS-7860 Ver:1.2 For Hp 400 G1 G2 Mt ... - AliExpress
Understanding the HP MS-7860 Ver 1.2 Motherboard MS-7860 Ver 1.2
is a proprietary motherboard manufactured by MSI for HP, primarily used in the HP ProDesk 400 G1 400 G2 MT (Microtower)
desktop series. While it is a reliable workhorse for office and everyday use, its proprietary design means it has specific requirements for upgrades and repairs. HP Support Community Core Technical Specifications
, supporting 4th Generation Intel Core i3, i5, i7, Pentium, and Celeron processors (Haswell architecture). Intel H81 Express Two DDR3 DIMM slots supporting dual-channel memory. Max Capacity: Supports DDR3-1333 and DDR3-1600. Form Factor: (approximately 244 x 244 mm). Expansion Slots: 1x PCI Express x16 (3.0) for dedicated graphics cards. 3x PCI Express x1 for other expansion cards. 4x SATA ports (SATA II/III). Connectivity and Ports Video Output:
1x VGA and 1x DVI-D (or sometimes 1x DisplayPort depending on the specific HP SKU).
Typically features 2x USB 3.0 (blue) and 4x USB 2.0 on the rear, plus internal headers for front panel USB. Networking: Realtek RTL8151GH-CG Gigabit Ethernet. Realtek ALC221 High Definition Audio. AliExpress Vital Installation & Troubleshooting Info
If you are moving this board to a new case or repairing a failed unit, keep these pinout details in mind: Common Wire Color Power LED + Power Switch Solved: MS7860 v1.2 CPU Upgrade - HP Support Community If your motherboard is from a different brand
The MS-7860 Ver 1.2 is a proprietary Micro-ATX motherboard manufactured by MSI for HP ProDesk 400 G1 and G2 desktop series. Based on its H81 or H87 chipset, it supports 4th generation Intel Core processors and uses DDR3 memory. Core Technical Specifications Socket Type: Intel LGA 1150 (Socket H3).
Chipset: Intel H81 Express (standard in 400 G1) or H87 (found in 490 G1 models).
Form Factor: Micro-ATX (often referred to as ATX in proprietary HP towers).
CPU Support: Supports 4th Generation Intel Core i3, i5, and i7 processors (e.g., i7-4770, i5-4570, i3-4130) and compatible Pentium/Celeron chips. Memory and Storage
Original MS-7860 Ver:1.2 For Hp 400 G1 G2 Mt ... - AliExpress
MSI MS-7860 Ver:1.2 is a proprietary motherboard manufactured for HP, primarily used in business-class desktops like the HP ProDesk 400 G1
(Micro Tower) series. It is designed as a reliable, budget-friendly platform for 4th Generation Intel processors. Core Technical Specifications H81 Express . Some variants for the ProDesk 490 G1 may feature the Form Factor: Micro-ATX (M-ATX), measuring approximately 24 x 24 cm DDR3 Non-ECC. 2 DIMM slots. Max Capacity: Officially (2 x 8 GB). Supports up to (PC3-12800). CPU Support This motherboard is compatible with Intel 4th Generation (Haswell) processors. HP ProDesk 600 G1 Business Series Desktop
Since the H61 chipset relies on the CPU for graphics processing, video outputs are provided for Intel HD Graphics.
I've searched for information on the MS-7860 Ver 12 motherboard, but it seems that this specific model is not well-documented or widely used. However, I was able to find some general information and specs that might be helpful. Keep in mind that the accuracy of these specs may vary depending on the source.
MS-7860 Ver 12 Motherboard Overview
The MS-7860 Ver 12 is a motherboard model from MSI (Micro-Star International), a well-known manufacturer of computer hardware. The "Ver 12" likely indicates that this is a specific revision or version of the motherboard.
Specifications
Here are some specs that I was able to find:
Other Features
Disclaimer
Please note that these specs are based on limited information and might not be entirely accurate or up-to-date. Additionally, the MS-7860 Ver 12 motherboard might have some specific features or changes that are not documented here.
If you're looking for more information or need help with a specific issue related to this motherboard, I recommend:
MS7860 Ver 12 Motherboard Specifications
The MS7860 Ver 12 motherboard is a highly capable and feature-rich mainboard designed for computing enthusiasts and professionals. While specific details about this motherboard might be scarce due to its version and manufacturer, we'll provide a general overview and specifications that are commonly associated with motherboards of this caliber. Please note that actual specifications may vary based on the manufacturer and the exact model.