Manually edit each partition's linear_start_addr and physical_start_addr after the resized one.
Warning: modifying firmware/flash files can brick devices. Back up original firmware and follow vendor instructions. This guide assumes you understand flashing risks.
mkimage mt6833 -t scatter -o ./my_scatter.txt
On a rooted MT6833 device, run:
adb shell
su
cat /proc/dumchar_info
This outputs the current partition map. You can manually format it into a scatter file, but this requires deep knowledge of offset calculations.
For advanced users (e.g., porting a GSI or increasing /vendor size):
🧠 Pro tip: Always back up the original scatter file and full firmware before manually editing.
4. Tools for Flashing with an Updated Scatter File mt6833 scatter file upd
After updating the scatter file, verify the checksums of all images (e.g., md5 or SHA256) to ensure integrity.
5. Common Pitfalls and Troubleshooting
| Issue | Likely Cause | Solution |
|-------|--------------|----------|
| ERROR: STATUS_BROM_CMD_SEND_DA_FAIL | Preloader mismatch after scatter update | Flash back the original preloader from the matching firmware |
| Partition not found | Partition name changed (e.g., system removed in favor of super) | Use scatter file that matches the Android version (dynamic partitions require super) |
| Address overflow | Manual size adjustment didn't shift subsequent addresses | Recalculate all linear_start_addr values or revert changes |
| S_DL_GET_DRAM_SETTING_FAIL (5054) | Mismatch between scatter file's DRAM info and device | Extract a fresh scatter file from a working device using MTK Client or ReadBack in SP Flash Tool |
6. Extracting a Current Scatter File from a Working MT6833 Device
If you lost the original scatter file or want to verify the current layout:
Conclusion
The MT6833 scatter file is far more than a simple configuration text – it is the master blueprint for your device’s storage. Knowing how to read, update, and validate it empowers you to safely flash firmware, unbrick your phone, or customize partitions for advanced Android development. However, always treat scatter file updates with caution: verify the source, match it to the exact firmware build, and double-check addresses before hitting “Download”.
When in doubt, fall back to the official scatter file from your device manufacturer or the stock ROM package. With the right approach, you can keep your Dimensity 700 device running smoothly, even through major system updates.
For the MediaTek MT6833 (Dimensity 700), the scatter file acts as a partition map and configuration guide for tools like SP Flash Tool or mtkclient. It specifies where each binary component (like the preloader or system image) is stored on the device's eMMC or UFS storage. Structure of an MT6833 Scatter File
An MT6833 scatter file typically follows the "New Format" (Version 1.1.x) and is divided into several key sections: General Configuration:
MTK_PLATFORM_CFG: Defines the chipset (MT6833) and general storage type (EMMC or UFS).
STORAGE_TYPE: For MT6833, this is often EMMC or UFS 2.2 accessed via MSDC_0. On a rooted MT6833 device, run: adb shell
Partition Layout: Lists every firmware component with specific attributes: partition_index: The numerical order (e.g., SYS0 to SYS21).
partition_name: The unique identifier (e.g., preloader, recovery, vbmeta, super).
linear_start_addr: The hexadecimal starting address for that partition (e.g., 0x0 for preloader).
physical_start_addr: The actual physical location on the storage chip.
partition_size: The total allocated size, ranging from 64KB for small headers to 256MB+ for large images. Operational Flags:
is_download: Indicates if SP Flash Tool should write this file by default. This outputs the current partition map
operation_type: Defines if it is a BIN (binary), PROTECT (read-only), or INVISIBLE partition. Common MT6833 Partitions Partition Name Description Update Risk preloader The first-stage bootloader; crucial for device startup. High - Bricking risk if mismatched. recovery Contains the recovery environment (e.g., TWRP or Stock). vbmeta Verification data for Android Verified Boot (AVB). Medium - Can prevent booting if altered. super / system Houses the OS files and core applications. Low - Longest flash time. userdata Stores all user information and app data. High - Wipes user data. How to Update or Generate a Scatter File
If you have an MT6833 device and need a scatter file for firmware repair or updates: MediaTek Dimensity 700