Mtk Usb Driver V108 Fixed May 2026

This guide works for Windows 10 (20H2, 21H2, 22H2) and Windows 11 (all builds).

Yes and no.

A: Partially. Older Preloader modes still use VCOM, which v108 fixed handles well. However, for newer BROM (BootROM) and SP Flash Tool v6, you may need to also install libusb-win32 filters. Use v108 fixed as your base driver, then install MediaTek USB Port driver from v1.1236 for DA mode. mtk usb driver v108 fixed

  • Open Device Manager (Win + X → Device Manager).
  • Connect your powered-off phone via USB cable.
  • You will see a device appear briefly as "Preloader" or "MTK USB Port" – right-click it.
  • Choose Update driver → Browse my computer for drivers.
  • Select Let me pick from a list of available drivers → Have Disk.
  • Browse to the extracted v1.0.8 fixed folder and select the .inf file (usually mtk_usb.inf or usb2ser.inf).
  • Click OK → Next. Ignore any security warnings.
  • After installation, disconnect and reconnect the phone.

    • To confirm success:

    The v108 Fixed driver solves real, frustrating problems for MTK device flashing, especially on modern Windows. Its lack of official signing and inconsistent source distribution are the only downsides. Always download from trusted developer forums (XDA, 4pda, or the tool author’s site) and verify file hashes. This guide works for Windows 10 (20H2, 21H2,

    Tip: After installing, open Device Manager, connect your powered-off MTK phone, and you should see “MediaTek PreLoader USB VCOM (COMx)” or “MTK USB Port.” If not, try a different USB 2.0 port and a short, high-quality cable. Open Device Manager ( Win + X → Device Manager)