Nissan: E13 Engine Service Manual

From EM-12 of the manual:

| Interval (km) | Operation | |---------------------|----------------------------------------------------| | 10,000 | Oil & filter, check belts, hoses, fluid levels | | 20,000 | Inspect air filter, replace if needed | | 40,000 | Replace spark plugs, cabin filter | | 60,000 | Replace coolant, brake fluid, inspect valve clearance | | 100,000 | Replace drive belt, timing chain (inspect) | nissan e13 engine service manual

Valve clearance check (E13 non-turbo):
Intake: 0.20–0.28 mm cold
Exhaust: 0.23–0.31 mm cold From EM-12 of the manual: | Interval (km)

Based on real-world mechanic forums and Nissan TSBs (Technical Service Bulletins), here are the top failures for the E13 engine—and exactly where the service manual provides the fix. Valve clearance check (E13 non-turbo): Intake: 0

| Failure | Symptom | Service Manual Solution | | :--- | :--- | :--- | | Carbon buildup on intake valves | Cold start misfire, reduced MPG | EC section: Fuel injector cleaning via pressure tester. Also, describes walnut blasting procedure. | | Turbocharger wastegate rattle | Loss of boost at high RPM | EX section: Wastegate linkage adjustment (0.5 mm preload). | | Water pump seepage | Small coolant puddle near timing cover | CO section: Replacement interval (90,000 km) and sealant placement (three-bond 1217G). | | High-pressure fuel pump ticking | Loud metallic noise from engine right side | EC section: Lubrication of pump tappet and clearance check (0.1-0.3 mm). | | PCV valve clogging | Oil consumption, blue smoke on startup | LU section: PCV valve location (rear of valve cover) and cleaning procedure. |

| Code | Meaning | |-------|-----------------------------| | P0011 | Camshaft timing over-advanced | | P0171 | System too lean (bank 1) | | P0302 | Cylinder 2 misfire | | P0420 | Catalyst efficiency low |