Driver 64 Bit Gsm Forum — Nokia Rm-1035 Mtk Usb
In the fast-paced world of mobile hardware, the Nokia RM-1035 (commercially known as the Nokia 2) holds a special place. As one of the last mainstream devices to rely heavily on MediaTek’s MT6580 chipset, this phone became a workhorse in the budget segment. However, for GSM engineers, repair shop owners, and advanced users, the ability to flash, unlock, or repair this device hinges entirely on one critical piece of software: the Nokia RM-1035 MTK USB Driver for 64-bit Windows.
If you have landed on this page via a GSM forum search, you are likely facing the dreaded “USB Device Not Recognized” error or the “Preloader VCOM” driver missing in Device Manager. This article will serve as your definitive guide to installing, troubleshooting, and using the correct 64-bit drivers for the RM-1035.
Once your 64-bit driver is correctly installed, you can use it with:
Understanding the driver requirement requires an understanding of the MTK boot sequence. When an MTK device like the RM-1035 is connected to a PC via USB while powered off (or during a specific boot key combination), the device enters "BROM" mode.
For servicing the RM-1035, the driver must capture the device during Phase 1. Without the correct 64-bit signed driver, the Windows Device Manager will fail to recognize the device, flagging it as "Unknown Device" or immediately disconnecting it.
(Note: Users seeking the files discussed are advised to search the GSM-Hosting " Nokia Legacy Models " or "Infinity Box" sections, using the search term "MTK USB Driver" to find the most recently updated verified links.)
To install the Nokia RM-1035 (Nokia 130) MTK USB Driver on a 64-bit Windows system, you must typically disable Driver Signature Enforcement because these specialized flashing drivers are often not digitally signed. Key Steps for 64-Bit Installation Disable Driver Signature Enforcement: Hold the Shift key and click Restart.
Navigate to Troubleshoot > Advanced options > Startup Settings > Restart.
After the reboot, press 7 or F7 to select "Disable driver signature enforcement". Manual Driver Update:
Connect your Nokia RM-1035 to the PC using a USB cable. It may appear as an "Unknown Device" in the Device Manager.
Right-click the device and select Update driver > Browse my computer for drivers.
Choose Let me pick from a list of available drivers on my computer.
Select Ports (COM & LPT) or USB Devices, then click Have Disk and browse to the folder where you downloaded the MTK drivers. Nokia Rm-1035 Mtk Usb Driver 64 Bit Gsm Forum
Confirm Installation: Ignore the Windows security warning and click Install this driver software anyway. Resource Links
Driver Files: You can find driver packages on specialized driver sites like DriverIdentifier which host specific IDs for the Nokia 130 RM-1035.
Video Tutorial: A detailed visual guide for Windows 10 64-bit installation is available on YouTube.
Important Note: These MTK drivers are primarily for flashing and repair (using tools like Infinity BEST) rather than standard mass storage file transfers. For simple file transfers, the device should work with standard Windows drivers by selecting "Mass storage" on the phone menu.
Are you planning to use a specific tool like Infinity BEST or Miracle Box for flashing this device?
Nokia MTK Drivers Windows 10 64Bit Installation Guide #nokia
Installing the Nokia RM-1035 (Nokia 130) MTK USB drivers on a 64-bit Windows system is a multi-step process often discussed on technical forums like GSM Forum for tasks like flashing firmware or unlocking devices. Because the RM-1035 uses a MediaTek (MTK) chipset, you specifically need the MTK VCOM USB Preloader Drivers to establish a stable connection with flashing tools like Infinity Best or SP Flash Tool. 1. Preparation and Disabling Driver Signature Enforcement
On modern 64-bit versions of Windows (Windows 10, 11), you must disable Driver Signature Enforcement before installing these drivers, as they are often unsigned. Go to Settings > Update & Security > Recovery. Under "Advanced startup," click Restart now.
Once the PC restarts, navigate to Troubleshoot > Advanced options > Startup Settings > Restart.
When the list of options appears, press 7 or F7 to "Disable driver signature enforcement". 2. Downloading the Drivers
You need the MTK All-in-One USB Driver or specific Nokia MTK Flash drivers.
Look for packages that explicitly mention 64-bit support or "All-in-One". In the fast-paced world of mobile hardware, the
Resources like DriverIdentifier often host compatible files for the RM-1035. 3. Manual Installation via Device Manager
Since these drivers often come as .inf files rather than executable installers, manual installation is recommended.
The Nokia 130 (RM-1035) is a popular feature phone powered by a MediaTek (MTK) chipset, making the MTK USB Driver an essential tool for technicians and enthusiasts looking to flash firmware or repair the device.
On platforms like the GSM Forum, users frequently seek these drivers to resolve connectivity issues between the handset and a 64-bit Windows PC during maintenance tasks such as IMEI flashing or stock firmware updates. Essential Download & Specifications
For a successful connection, you need the version specifically compatible with modern 64-bit architectures. Supported Device: Nokia 130 Dual SIM (RM-1035).
Driver Version: Typically 7.1.32.115 or newer for stable performance. Supported OS: Windows 7, 8, 10, and 11 (64-bit editions).
Main Purpose: Enables the PC to recognize the phone in "Preloader" or "VCOM" mode for flashing tools like Miracle Box or SN Write. Installation Guide for Windows 64-Bit
Installing MTK drivers on 64-bit systems often requires a few extra steps due to driver signature enforcement. Scribdhttps://www.scribd.com ALL MTK USB Driver 2013 - by GSM HOQUE - GSM-Forum PDF
To install the Nokia RM-1035 (Nokia 130) MTK USB driver on a 64-bit Windows system, you generally need to disable driver signature enforcement to allow the unsigned MediaTek drivers to function correctly. Essential Preparation Before manual installation, Disable Driver Signature Enforcement (specifically for Windows 10/11 64-bit): key and click from the Power menu. Navigate to Troubleshoot Advanced Options Startup Settings to select "Disable driver signature enforcement". Installation Steps
Once your PC restarts in this mode, follow these steps to install the driver manually via Device Manager: Connect Device
: Power off your Nokia phone and connect it to your PC via a USB cable. Locate in Device Manager : Right-click the button and select Device Manager
. Your phone should appear as an "Unknown Device" or "MTK USB Port" under Other Devices Update Driver Right-click the detected device and select Update driver Browse my computer for driver software Let me pick from a list of available drivers on my computer Choose the Ports (COM & LPT) category and click Select File Once your 64-bit driver is correctly installed, you
The Nokia RM-1035 (marketed as the Nokia 130 Dual SIM) is a feature phone built on the MediaTek (MTK) chipset. To service the device—such as flashing firmware or bypassing security codes—you must install specific MTK USB VCOM Drivers. Driver Installation Overview
Because the Nokia RM-1035 uses an MTK processor, standard Windows drivers are often insufficient for flashing tools like Infinity BEST. For 64-bit systems (Windows 7, 8, 10, or 11), a specific sequence is required to ensure the hardware is recognized in "Preloader" or "Flash" mode. 1. Disable Driver Signature Enforcement
On Windows 10/11 64-bit, the OS will block unsigned MTK drivers by default. You must disable this before proceeding: Hold the Shift key and click Restart.
Navigate to Troubleshoot > Advanced options > Startup Settings > Restart.
Press 7 (or F7) to select "Disable driver signature enforcement". 2. Install the MTK USB Drivers
Once signature enforcement is disabled, use the following steps to install the driver:
Manual Install: Open Device Manager, right-click your computer name, and select "Add legacy hardware."
Locate Files: Select the "Have Disk" option and browse to your downloaded driver folder (often categorized as "Drivers64").
Choose Model: Select the MTK USB Port or MediaTek Preloader USB VCOM Port.
Connection: Power off the phone and connect it via micro-USB while holding the "boot key" (usually the center OK button or simply connecting without battery). Technical Specifications for RM-1035
Nokia MTK Drivers Windows 10 64Bit Installation Guide #nokia
This report is designed for technicians, developers, and mobile phone repair professionals.
Microsoft’s driver signature enforcement (introduced with Windows Vista and tightened in Windows 8/10/11) blocks unsigned kernel-mode drivers. The standard MTK USB drivers (version 3.0.1504.0 and above) are signed, but the legacy “Preloader USB VCOM Port” drivers often trigger installation errors on modern 64-bit systems. This is why you need the specific driver bundle tailored for the RM-1035.