You can create a flashable ROM without a PAC file by:
❗ Without authorized OST LA access, a PAC file is essentially unusable. Consumer tools do not support direct PAC flashing.
The Nokia TA-1304 PAC file is an essential low-level firmware package for repairing and restoring devices based on the Unisoc platform. While powerful, it requires precise matching of firmware version, careful tool usage, and awareness of legal and warranty limitations. Unauthorized flashing should only be attempted by experienced technicians with verified PAC backups.
Report prepared for informational and educational purposes only. Always consult official Nokia support for firmware-related issues.
The Nokia TA-1304 Go to product viewer dialog for this item. is the single SIM variant of the Nokia 105 (2019) Go to product viewer dialog for this item.
. Because it uses a Spreadtrum/UNISOC chipset, it requires a .PAC file for flashing.
While official firmware centers like firmware.center host Nokia files, direct "official" public links for this specific model are often restricted to authorized service tools. Flashing Guide
If you have the .pac file, follow these steps using the SPD Flash Tool (ResearchDownload):
Preparation: Install the necessary Spreadtrum (SPD) USB Drivers on your PC and ensure your phone battery is at least 60%.
Load File: Open ResearchDownload.exe, click the gear icon, and select your .pac file. Initiate: Click the triangle (Play) button. nokia ta1304 flash file pac file
Connect: Power off the phone. Hold the volume buttons (or the middle "OK" button for some feature phones) and plug in the USB cable.
Finish: The tool will show a "Passed" message once complete, and the device will reboot. The Ghost in the Machine: A Short Story Elias stared at the Go to product viewer dialog for this item.
on his workbench. It was a TA-1304—a simple black brick of plastic—but to him, it was a vault. His grandfather had died three days ago, leaving behind this phone and a cryptic note: The code is in the flash.
The phone was bricked, stuck in a boot loop that flickered the Nokia logo like a dying heartbeat. Elias connected it to his laptop. He didn't just need to fix it; he needed to see the "flash"—the raw data stored in its memory.
He opened the SPD tool. The progress bar crawled. 5%... 20%... 65%... The air in the garage felt heavy, smelling of solder and old paper. When the tool finally flashed "Passed," the phone chirped—that iconic, jaunty tune that felt strangely disrespectful in the silence.
Elias bypassed the setup. He didn't find a text message or a contact. Instead, he opened the "Drafts" folder. There was a single entry, dated the night his grandfather passed:
"Elias, I didn't want the cloud to have this. Some things should stay in the hardware. Look under the loose floorboard in the tool shed. The physical key matches the digital one."
Elias looked at the small screen, then at the heavy iron key sitting next to his keyboard. The "flash" hadn't just brought the phone back to life; it had started a new chapter. firmware or more troubleshooting steps?
How to flash to a single partition on Spreadtrum using a PAC file You can create a flashable ROM without a PAC file by:
How to flash to a single partition on Spreadtrum using a PAC file - YouTube. This content isn't available. Download links & Text @ YouTube·Hovatek
Spreadtrum/UNISOC firmware (.pac) flashing - TheMasterArchiver
Instructions * Download the device's stock ROM. * Download the SPD Flash Tool with drivers and unpack them. * Install the drivers. Nokia 105 (TA-1304 SS) Pink - - IT - MOBILES
To flash the Nokia TA-1304 (Nokia 6310 4G), you must use the SPD Upgrade Tool because the device is powered by a Spreadtrum/Unisoc chipset. The firmware for this device is provided as a .PAC file, which contains all the necessary instructions and system partitions to restore or update the phone's software. Essential Requirements
Before starting, ensure you have the following components prepared:
Flash File: The official stock firmware in .PAC format for the TA-1304 model.
Flashing Tool: The SPD Upgrade Tool (also known as the Spreadtrum Upgrade Tool).
USB Drivers: Latest SPD/Unisoc USB Drivers must be installed on your PC so it can recognize the device in "Boot Mode".
Battery: At least 60% charge to prevent the device from powering off mid-process, which could lead to a permanent brick. Connect phone to PC
Backup: Flashing will erase all user data; ensure you have backed up any critical information. Flashing Procedure
Follow these steps to install the PAC file using the SPD Upgrade Tool:
Extract Files: Extract the downloaded tool, drivers, and firmware on your computer.
Install Drivers: Run the driver setup file to ensure your PC communicates with the phone.
Launch Tool: Open the UpgradeDownload.exe or ResearchDownload.exe from the tool folder.
Load Firmware: Click the "Load Packet" button (gear icon) and select your .PAC flash file. Wait for the tool to finish loading the file. Initiate Flash: Click the "Start Downloading" button (play icon). Connect Device: Turn off your Nokia TA-1304
Hold the Boot Key (usually the Star (*) or Hash (#) key for Nokia feature phones).
Connect the device to your PC via a USB cable while holding the key.
Monitor Progress: The tool should show a progress bar. Once finished, a green "Passed" or "Finish" message will appear.
Restart: Disconnect the phone, remove and re-insert the battery, and power it on normally. Flashing Guide for SPD Upgrade Tool | PDF - Scribd
⚠️ DISCLAIMER: Flashing your device carries risks. It can void your warranty, wipe your data, or potentially "brick" (permanently damage) your phone if done incorrectly. Proceed at your own risk. This guide is for educational purposes only.