Oneaccess One100 Installation Manual Oneaccess Top Access

Disable Telnet immediately:

(config)# crypto key generate rsa modulus 2048
(config)# ip ssh version 2
(config)# line vty 0 4
(config-line)# transport input ssh
(config-line)# login local
(config-line)# exit
(config)# username remote-admin password StrongP@ssw0rd

Now connect via ssh remote-admin@192.168.1.1.

Once enrolled:

The One100 back panel (rear view from left to right):

| Port | Label | Type | Purpose | |------|-------|------|---------| | 1 | ETH0/WAN | RJ45 10/100 | WAN uplink (DHCP client or PPPoE) | | 2 | ETH1 | RJ45 10/100 | LAN switch port (VLAN 1 default) | | 3 | ETH2 | RJ45 10/100 | LAN or secondary WAN | | 4 | ETH3 | RJ45 10/100 | LAN or management | | 5 | USB | USB 2.0 Host | Configuration restore / 4G dongle | | 6 | CONSOLE | RJ45 | Serial console access | | 7 | POWER | 2.1mm DC jack | 12V input |

Installation order:

Assuming DHCP from ISP:

(config)# interface eth0
(config-if)# description WAN_Uplink
(config-if)# ip address dhcp
(config-if)# no shutdown
(config-if)# exit

For static IP:

(config-if)# ip address 203.0.113.10 255.255.255.0
(config-if)# ip default-gateway 203.0.113.1

The full OneAccess ONE100 Installation and Configuration Manual (ref. OA‑ONE100‑IM‑EN‑v4.2) is available from:

The OneAccess ONE100 series router integrates voice and high-speed data by connecting DC power, LAN via Ethernet ports, and WAN through ADSL/VDSL interfaces. Initial configuration involves using a console cable for CLI access, setting IP addresses, and mapping voice ports. For detailed installation steps, see the OneAccess Design & Installation Guide.

The OneAccess ONE100 is a multiservice, voice-enabled router designed for small to medium-sized businesses, primarily used to bridge legacy voice systems (like ISDN PBX) with modern VoIP networks. oneaccess one100 installation manual oneaccess top

Below is a feature breakdown of the installation manual and technical capabilities for this device. Core Installation Steps The ONE100 Installation Manual

typically follows a structured 7-chapter process to ensure enterprise-grade connectivity:

Safety & Compliance: Covers electrical grounding, overcurrent protection, and maintaining a 20 cm distance from antennas. Physical Setup:

Power: Connect the 12V DC power adapter to the rear panel; there is no physical On/Off switch.

Mounting: The device is compact and can be rack-mounted using an optional kit. Hardware Connections: Now connect via ssh remote-admin@192

LAN: Connect PC or local switch to the 4-port 10/100 Ethernet switch ports.

WAN: Connect the ADSL interface (RJ-11) or the Fast Ethernet uplink depending on the model.

Voice: Connect analog devices (phones/faxes) to FXS ports or a PBX to BRI ports.

Initial Configuration: Access the router via the RS-232 Console port (RJ-45) or the web-based configurator. Key Technical Features Oneaccess ONE100-2B S5E Multiservice Router - BS Broadcast