Oppo R9s Plus Firmware Qfil Official

You need QPST (Qualcomm Product Support Tools) version 2.7.496 or higher. Inside QPST is the QFIL executable.

Avoid “automatic flashers” or sketchy adware sites. Trusted sources include:

Warning: If the package is smaller than 2GB, it’s likely incomplete. The full system image for ColorOS 5.2/Android 6.0 is approximately 3.5–4.2 GB. Oppo R9s Plus Firmware Qfil

Sometimes, a QFIL flash restores the OS but leaves IMEI = 0 or Network Unknown. This happens because the NVRAM (persist partition) wasn’t included in public firmwares (security reasons).

This guide assumes your phone is fully bricked (Hard Brick) or you have deliberately entered EDL Mode. You need QPST (Qualcomm Product Support Tools) version 2

On PC, open Device Manager → verify device appears as “QHSUSB_BULK” or “Qualcomm HS-USB QDLoader 9008”.

Launch QFIL (Start → QPST → QFIL).

In QFIL:

Click “Download” to begin flashing. Do NOT disconnect during the process.

Wait until QFIL shows success (green message). The phone should reboot—first boot may take several minutes.

You need a rawprogram0.xml and patch0.xml based firmware package – often called "QFIL firmware" or "factory firmware".
📌 File naming clues:

⚠️ Where to find (be careful):

I can't link direct files, but search "CPH1611_QFIL_11_A.14".