Palfingercranemanualerrorcodes

You will find many websites claiming to list "all Palfinger error codes." Be very careful. Palfinger frequently updates their firmware. An E105 on a 2005 PK model might mean "Left outrigger not deployed," whereas on a 2020 EPS model, it means "Hydraulic oil temperature sensor failure."

The golden rule: The error code display is only half the message. The blinking pattern (steady vs. flashing) and the acoustic buzzer frequency (continuous vs. intermittent) are also defined only in the official manual. palfingercranemanualerrorcodes

| Error Code | Description | Immediate Action | | :--- | :--- | :--- | | 101 | Battery voltage below 10.5V (Low voltage lockout) | Check alternator and truck batteries. Jump start or charge. | | 102 | Voltage spike / Over-voltage (>16V) | Regulator failure. Disconnect crane immediately to save ECU. | | 110 | Ground fault at main relay | Clean chassis ground strap. Measure resistance (<0.5 Ohms). | | 115 | Control unit internal power failure | Cycle main power. If persists, ECU replacement required. | You will find many websites claiming to list

Pro Tip: Over 60% of code 101 errors are caused by corrosion on the battery terminals, not a dead battery. Do NOT clear without fixing – codes reappear

  • Do NOT clear without fixing – codes reappear if root cause remains.

    • Do not rely on third-party summaries for your specific serial number. Palfinger changes pinouts and resistor values by generation.

    To get the exact palfingercranemanualerrorcodes for your machine: