The role of women in rural enterprises and their contributions to sustainable territorial development. Popular market of the city of Latacunga, province of Cotopaxi and the ShunGo Foundation

Edilberto   Chacon Marcheco; Agnese   Bosisio; Amparo Del Carmen  Álvarez Montalvo; Giovana Paulina   Parra Gallardo

doi:10.56294/sctconf2024.660

Phison Mpall V5.13.0c May 2026

Verdict: v5.13.0c is the most reliable for everyday repair scenarios. Use newer versions only if your drive was manufactured after 2020.

Before flashing, run GetInfo.exe (if included in package) or Phison_GetInfo_v3.12.0C.exe:

Phison doesn’t distribute MPall publicly, but you’ll find v5.13.0c on:

Always scan downloads with VirusTotal – these tools often get flagged as “hacktool” due to low-level disk access, but that’s normal.

Alternatively, run main tool → Click “Scan USB (F5)” – should list your drive.

Unscrew the USB casing (if possible) and look for a black rectangular chip with "Phison" and a model number starting with "PS".

Right-click → Run as Administrator all executables later.

1. Run MPParamEdit_F1.exe
2. IC Type = Auto (or match controller)
3. Partition Mode = 2 (Public only)
4. Format = Tick + Low Level Format
5. Save .ini
6. Open main MPALL tool, load .ini, scan, start
7. Wait 5-10 minutes
8. Re-plug USB → fixed

If you need the exact firmware file for your specific Phison controller (e.g., PS2251-07), provide the USB VID/PID and controller version (from ChipGenius), and I can help locate the correct firmware.

Phison MPALL (Multi-Phison Area Low-Level) v5.13.0C is a specialized low-level flashing utility designed for USB flash drives that use Phison controllers. It is primarily used by technicians and advanced users for hardware-level repairs, such as restoring "bricked" drives or removing hardware-based write protection. Core Functionality

As a production-grade tool, Phison MPALL interacts directly with the controller chip to manage NAND flash storage and firmware. Key capabilities include:

Firmware Restoration: Re-flashing corrupted firmware on drives that are no longer recognized by Windows.

Write-Protection Removal: Unlocking retail USB drives (such as Windows installation media) that have been permanently set to "Read-Only".

Partition Management: Creating custom partitions, such as making a portion of the drive appear as a CD-ROM. Use in Data Recovery and Repair

For drives experiencing "software-level" failure—where the hardware is intact but the data structure is lost—MPALL can often perform a "low-level format" to reset the controller to factory settings. Tool Workflow

The utility typically includes several components, such as MPALL_F1_9000_v513_0C.exe for the main interface and a GetInfo tool to identify the specific controller version (e.g., PS2251-09) and current firmware. This information is critical because using the wrong firmware or settings within the tool can cause permanent damage to the USB hardware.

You can find more detailed technical documentation and version-specific files on community-driven hardware repair sites:

USBDev.ru: A comprehensive archive of Phison tools and firmware.

Kasito.ru Guide: Specific walkthrough for using v5.13.0C to unlock Microsoft-branded USB drives. Phison MPALL v5.13.0C - USBDev.ru

MPALL v5.13.0C is a high-level "Mass Production" (MP) tool designed to repair, format, or reflash firmware on USB flash drives using Phison controllers. This specific version is often used for newer controller models like the PS2251-07 (UP307) Essential Preparation Phison Mpall V5.13.0c

Before using MPALL, you must verify your drive's hardware using a tool like ChipGenius

to ensure it has a compatible Phison controller and firmware. Flash Drive Repair Process Launch the Tool

: Unzip the MPALL distribution and run the main executable file. : Connect your flash drive and click the button to see if the tool recognizes the drive. Basic Configuration and select Basic Adjustment followed by New Configuration Controller type to your specific model (e.g., If you are just formatting, you may select settings to format without filling firmware Advanced Firmware Flashing (Only if needed): Load the correct Burner File BN07V500T9.BIN Firmware File FW07V50353TW.BIN ) that match your device’s VID, PID, and revision.

and wait for the process to finish. Successful operations will typically show messages like "Erasing Flash," "Writing Flash," and finally "Flash OK" Common Troubleshooting Mode 255 Error

: Indicates the tool does not support the current state of the device or the firmware is corrupted. This often requires finding the exact matching firmware file. Write Protection

: If the drive is seen as "Mode 3" and is write-protected, you may need to use in Windows to clear attributes before flashing. Red Drive Display

: If the drive shows up as red in MPALL, it usually indicates a compatibility mismatch or that the drive is not in "test mode".

: For stubborn drives, you may need to manually enter "test mode" by shorting specific pins on the controller chip to make it detectable for flashing. Super User for your drive's controller model?

Phison MPALL V5.13.0c is a powerful, low-level factory utility designed for repairing, formatting, and "mass producing" USB flash drives equipped with Phison controllers. While it is often a lifesaver for "bricked" or write-protected drives, it is a technical tool not intended for casual users. Core Capabilities Firmware Restoration

: Reinstalls corrupted firmware on drives that appear as "No Media" or are not recognized by Windows. Partition Management

: Allows for advanced partitioning, such as creating a fixed disk partition, a CD-ROM emulation partition, or encrypted areas. Write Protection Removal

: Can often bypass hardware-level write protection errors that standard formatting tools cannot touch. Bad Block Management

: Scans and "hides" defective sectors of the NAND flash to stabilize a failing drive. Compatibility

V5.13.0c is a modern iteration of the MPALL (Mass Production Alliance) suite. It primarily supports newer Phison controllers like the PS2251-11 (U11)

, and may offer extended support for newer high-speed controllers found in USB 3.1/3.2 drives. The User Experience: "High Risk, High Reward"

Technical Overview: Phison MPALL V5.13.0C Phison MPALL (Mass Production Tool) V5.13.0C is a specialized low-level firmware utility used to repair, format, and configure USB flash drives featuring Phison controllers, specifically optimized for the PS2251-07 (PS2307) Core Functionality

This utility is primarily used for "unbricking" USB drives that exhibit critical errors such as: "No Media" Errors

: When a drive is detected by the OS but shows zero capacity. Write Protection : Overriding firmware-level read-only attributes. Firmware Corruption | Version | Best For | Limitations |

: Restoring the drive's ability to communicate with the host computer. Bad Block Management

: Identifying and isolating defective NAND memory segments to restore drive stability. Technical Specifications & Compatibility Primary Controller Support : PS2251-07 (also known as PS2307). Interface Compatibility

: Optimized for USB 3.0 controllers, though often more stable during flashing when connected via USB 2.0 ports to avoid "handshake" timing issues. OS Support

: Typically Windows-based (Windows 7 through Windows 10/11). Step-by-Step Restoration Guide Using MPALL is a high-risk "last resort" process that erases all data permanently Identification : Use a tool like ChipGenius

to confirm the drive uses a Phison controller and to identify the specific (Vendor ID) and (Product ID). Initialization Unzip the MPALL V5.13.0C distribution. Run the main executable (typically MPALL_F1_9000_v*.exe Configuration to detect the connected drive. and select Basic Adjustment New Setting Ensure the values match your ChipGenius report. Firmware & Burner Selection Select the appropriate "Burner" file (e.g., BN07V*.BIN ) and "Firmware" file (e.g., FW07V*.BIN ) matching your controller version. . The process may take several minutes; do

disconnect the drive until a green "OK" or "Finish" status appears. Critical Troubleshooting

Phison MPALL (Multi-Port Mass Production Tool) v5.13.0C is a specialized firmware flashing and repair utility for USB flash drives using Phison controllers. It is primarily used to restore "dead" drives, remove write protection, or create custom partitions (like CD-ROM partitions) on compatible hardware. Key Features & Capabilities

Controller Support: Highly compatible with various Phison USB controllers, including PS2251-07, PS2251-67, PS2251-03, and others.

Mass Production (MP): Designed for mass-flashing firmware to multiple drives simultaneously.

Drive Recovery: Fixes common issues where a drive shows "No Media," "Device not recognized," or becomes read-only.

Custom Partitioning: Allows users to set up a CD-ROM emulation partition or a Hidden partition on the flash drive.

Detailed Information: Includes tools like GetInfo.exe to identify the exact controller model and Flash ID (FID) before flashing. General Repair Workflow

To use this version for repairing a drive, users typically follow these steps:

Identify Hardware: Use GetInfo.exe or ChipGenius to confirm your drive has a Phison controller.

Configuration: Open MPParamEdit_F1.exe to configure settings based on your controller (e.g., selecting the correct burner and firmware files).

The Flash: Run MPALL_F1_9000_v513_0C.exe, click Update to find the drive, and then Start to begin the flashing process.

Error Handling: If the drive isn't detected, it may need to be put into "Test Mode" by shorting specific pins on the controller chip. Precautions

Permanent Risk: Flashing the wrong firmware can permanently brick the USB drive. Before flashing, run GetInfo

Data Loss: This process formats the drive and erases all existing data.

Security Alerts: Some antivirus programs may flag these utilities as suspicious because they interact directly with hardware drivers.

Phison MPALL v5.13.0C is a specialized Mass Production (MP) tool designed for low-level formatting, firmware updates, and repair of USB flash drives utilizing Phison controllers. It is widely used in the technician community to restore "dead" or write-protected drives and to create custom partitions, such as USB-CDROM emulations. Key Technical Details

Controller Support: Optimized for modern Phison controllers, specifically those in the PS2251 (PS23xx) series, including popular chips like the PS2251-07 (PS2307) and PS2251-03.

Firmware Requirements: To function correctly, the tool often requires specific binary files (Burner and Firmware) tailored to the drive's controller and Flash ID, such as BN03V114M.BIN for certain PS2251-03 chips. Primary Functions:

Repair: Fixing drives marked as "Write Protected" or those showing zero capacity.

Customization: Partitioning drives into multiple LUNs (Logical Unit Numbers) to host a bootable ISO as a CD-ROM partition alongside standard storage.

Parameter Editing: Adjusting the VID (Vendor ID), PID (Product ID), and serial numbers. General Restoration Process

Technicians typically follow these steps when using MPALL v5.13.0C, as outlined on community hubs like USBDev.ru:

Identification: Use a utility like ChipGenius or Phison's GetInfo to find the exact Controller and Flash ID.

Configuration: Run MPParamEdit_F1.exe to create a .ini configuration file. This includes selecting the "New Configuration" and "Basic Adjustment" modes to map the firmware binaries.

Flashing: Execute MPALL_F1_7F00_DL07_v513_0C.exe, load the configuration, and press "Start." If the drive is not detected, it may need to be put into Test Mode (physically shorting pins on the controller). Troubleshooting & Limitations

Red Box Errors: In MPALL, a "Red" status box usually indicates a mismatch between the firmware version and the controller, or an incorrect Flash ID setting.

Write Protection: Some modern retail drives (e.g., Windows recovery sticks) may have hardware-level write protection that remains difficult to bypass even with MPALL v5.13.0C.

Stability: Users have reported occasional crashes when using older binary files with newer versions of the MPALL software.

For the most accurate files and configuration guides, the Phison MPALL section on USBDev.ru remains the primary repository for this software. To provide a more specific guide, could you let me know:

What is the Controller model (e.g., PS2251-07) of your drive? What is the Flash ID?

Are you trying to repair a broken drive or create a CD-ROM partition? Phison MPALL v5.13.0C - USBDev.ru