Do not simply click "Start." You will brick the drive.
If your drive is completely dead (not detected at all by Windows), MPtool cannot fix it via USB alone. You need to force the controller into ROM mode.
You don't "install" the Phison PS2251-07 MPTool; you download a specific version of MPALL, extract it, configure the .bnx firmware file, and execute a low-level flash. Proceed with caution, as flashing incorrect firmware can permanently brick the device.
The Phison PS2251-07 (also known as PS2307) is a high-speed USB 3.0 controller commonly used in drives like the Kingston DataTraveler. The MPTool (often part of the Phison MPALL suite) is a professional manufacturing utility used to repair "dead" or corrupted drives, fix write-protection errors, or reflash firmware. Essential Preparation
Before attempting a repair, you must identify the exact hardware specifications using a tool like ChipGenius or Flash Drive Information Extractor. Reflashing with the wrong firmware can permanently brick your device. Controller Model: Must be confirmed as PS2251-07 or PS2307. NAND Type: Identify the memory chip (e.g., TLC, MLC, eD3).
Operating System: Use Windows (ideally Windows 7 or XP via a virtual machine), as these tools often struggle with modern security settings in Windows 10/11. Common MPTool Versions for PS2251-07
Not every version of MPALL supports this specific controller. The most compatible versions typically include: Phison MPALL v5.13.0C - USBDev.ru
To fix or reflash a flash drive with the Phison PS2251-07 (PS2307) controller, you generally use the Phison MPALL (Multi-Port ALL-in-one) production tool. Step 1: Preparation & Identification
Before flashing, you must identify your drive's specific hardware using ChipGenius or Phison GetInfo.
Controller: Must be PS2251-07 (sometimes labeled as PS2307).
Flash ID: Record the Flash ID (e.g., 98 DE 88 A3) as this determines which firmware files you need. Step 2: Download Required Files
You need three components, typically found on sites like USBDev.ru:
MPALL Utility: Versions like v3.71.00 or v3.81 are commonly used for this chip.
Burner File (BN): Usually named BN07*.bin (e.g., BN07V106.BIN).
Firmware File (FW): Usually named FW07*.bin (e.g., FW07V102.BIN). Step 3: Configuration (MPALL)
Run MPALL_F1_9000.exe (or the version provided in your download). Click Update to let the tool detect your drive. Click Setting and select New Setting. In the Flash Setting tab: Controller: Select PS2251-07. Host Port: Set to USB 3.0 (if applicable). Burner File: Browse and select your BN07*.bin file. Firmware File: Browse and select your FW07*.bin file. In the Partition Setting tab: Set Mode 3 for a standard single partition. Click Save to create an .ini config file. Step 4: The Flashing Process Return to the main screen.
Ensure your drive is still detected (it may show up as "IC Check Error" or "2307 PRAM" if corrupted). Click Start.
Important: Do NOT unplug the drive until the box turns Green (Success). If it turns Red, note the error code (e.g., 0x1106). Troubleshooting & Expert Tips Phison PS2251-07 (PS2307) Firmware [BN07*.BIN, FW07*.BIN]
Phison PS2251-07 (also known as PS2307) is a popular USB 3.0 controller found in many flash drives, including brands like Kingston and Toshiba. When these drives become "write-protected" or "unrecognized," specialized Mass Production (MP) tools are required to reflash the firmware and restore functionality. Essential Tools for PS2251-07/PS2307
To repair this specific controller, you will typically need one of the following from specialized repositories like Phison MPALL (v5.03.0A or newer): The professional-grade mass production tool. Version
is specifically recommended for PS2251-07 controllers using eD3 flash memory. Phison UPTool:
A simpler alternative used when MPALL fails to recognize the drive. Phison Format & Restore Tool:
A "one-click" end-user utility that can sometimes fix minor firmware glitches without complex manual configuration. Installation & Flashing Procedure This process is high-risk and will erase all data
on the drive. It may also permanently brick the device if incorrect firmware is used. Identify Your Hardware: Use a tool like ChipGenius to confirm your controller is indeed a PS2251-07 (PS2307) and note the (e.g., Toshiba or Hynix memory). Download MPALL:
Extract the MPALL distribution (e.g., v5.13.0C or v5.03.0A) to a local folder. Configure the Tool: MPParamEdit_F1.exe to create a configuration file ( Controller dropdown, select Select "Basic Adjustment" and "New Configuration". Input the correct VID and PID (commonly for Kingston). Connect the Drive: Plug your USB drive into a USB 2.0 port
if possible, as some MP tools struggle with USB 3.0 drivers during the flashing process. Start Flashing: MPALL_F1_...exe to see your drive in the list. to begin the low-level format and firmware burn. HDD GURU FORUMS Troubleshooting Common Errors No Drive Found: Try running the tool on Windows XP or Windows 7 (x86)
, as modern Windows 10/11 security often blocks the low-level drivers needed by MPALL. Check Sum Error:
In newer DL20 versions of MPALL, you may need to manually bypass checksum verification in the 2307 PRAM / Panic Mode:
If the drive identifies as "2307 PRAM," it has entered a manufacturing mode. You may need to "short" the NAND pins to force the controller into a state where it can accept new firmware. HDD GURU FORUMS for a specific tool like Phison MPALL HDD GURU FORUMS • View topic - Phison PS225107 USB Drive. phison ps225107ps2307 mptool install
Your query likely refers to a few different operations regarding the Phison PS2251-07 (PS2307) USB controller.
Interpretation 1: You are trying to find and install the mass production software (MPTool / ST-Tool) to restore or format a corrupted, write-protected, or bricked USB flash drive.
Interpretation 2: You are attempting to build or flash custom "BadUSB" firmware (like Psychson) onto a drive with this specific Phison chip for security research. Which of these interpretations
While your query could mean either of the above, I am answering for the most likely one: repairing a corrupted Phison USB drive using an MPTool. ⚠️ Critical Warning
Data Loss: Running an MPTool will permanently erase all data on the USB drive.
Risk of Bricking: Using the wrong firmware version or settings can permanently destroy your USB flash drive. 🛠️ Step-by-Step Recovery Guide 1. Identify Your Chip
To ensure your USB drive actually uses the Phison PS2251-07 (PS2307) controller, you must analyze it with hardware detection software.
Download and run the ChipEasy tool or the Flash Drive Information Extractor.
Insert your flash drive and verify that the Controller part number shows PS2251-07 (often written with the internal code PS2307).
Take note of the Flash ID (e.g., Toshiba or Hynix memory codes) as you will need to match this later. 2. Download the Correct MPTool / ST-Tool
Phison does not officially distribute these engineering tools to consumers. You must source them from specialized flash drive repair databases.
Search for Phison MPTool or Phison ST-Tool versions compatible with the PS2251-07 chip on trusted database archives like USBDev.ru or FlashBoot.
You will likely need a tool named similarly to Phison MPTool MPALL or ST-Tool Rel. 3. Source the Matching Firmware Files
To fully restore the drive, the MPTool needs two specific binary files that match your exact memory chip: Burner File: Usually named starting with BN07*.BIN. Firmware File: Usually named starting with FW07*.BIN. 4. Running the Tool Extract the downloaded MPTool folder.
Right-click the executive file (e.g., MPALL_F1_...exe) and select Run as Administrator.
Click Update or Refresh to let the tool detect your USB drive.
Go to Settings and load your specific chip configuration, mapping the Burner and Firmware files you downloaded.
Click Start and do not unplug the drive until the process finishes and returns a green "OK" status.
⚡ Key Point: If your PC cannot detect the USB drive at all (making it impossible for the MPTool to see it), you may need to manually short the pins on the NAND memory chip to put the controller into "test mode" before plugging it in.
Did you want the dominant intent of fixing a broken drive, or were you looking for help with the BadUSB firmware modification? bidhata/phison-2307-BadUSB: PS2251-07(PS2307 ... - GitHub
Phison MPTool (specifically Phison MPALL or ST-TOOL) cannot be installed like standard software as it runs as a portable standalone application. Flashing or configuring the Phison PS2251-07 (also known as
microcontroller requires strict hardware-specific procedures to prevent permanent damage to your flash drive. ⚠️ Critical Warnings Before Proceeding
Data Loss: This procedure will completely wipe all data on the flash drive.
Bricking Risk: Using the wrong firmware or burner file will render the USB drive completely unusable (bricked).
Port Selection: Always connect your drive directly to a USB 2.0 port on your computer's motherboard. Do not use USB 3.0 ports or external USB hubs, as they frequently cause communication failures during the flashing process. 🛠️ Step-by-Step Mass Production (MP) Setup Follow these specific instructions to prepare and use the 1. Download the Required Software
Navigate to authoritative firmware repositories such as USBDev Phison Archive to locate your files. Download a compatible version of
Phison MPALL (e.g., MPALL v5.03.0A or newer specifically optimized for
Download the correct Burner file (usually named starting with BN07*.bin) and the corresponding Firmware file (usually starting with FW07*.bin) matching your exact flash memory type. 2. Extract the Executables Do not simply click "Start
Extract the downloaded MPALL .rar or .zip archive directly into a folder on your local drive (e.g., C:\MPALL\).
Place the extracted Burner (BN*.bin) and Firmware (FW*.bin) files directly inside that same MPALL folder. 3. Detect the Drive in MPALL
Right-click MPALL_F1_7F00_*.exe and select Run as Administrator. Insert your USB flash drive into the computer.
Click the Update button on the right side of the MPALL interface. Your drive should populate in one of the numbered grid boxes. 4. Edit the Configuration File
Open MPParamEdit_F1.exe found in the same folder to build a clean configuration file (.ini). Set the controller type to .
Under the flashing options, browse and manually link the precise path to your BN07*.bin (Burner) file and your FW07*.bin (Firmware) file.
Save the configuration as MP.ini or similar and close the editor. 5. Execute the Process Return to the main MPALL window. Check the box next to your identified drive letter.
Select the custom .ini configuration file you just created from the drop-down menu.
Click Start to begin low-level formatting and firmware execution.
Note: If the drive is heavily corrupted or non-responsive, you may need to physically open the casing and short designated circuit pins to force the controller into Test Mode (PRAM mode) before MPALL can detect it. AI responses may include mistakes. Learn more Phison PS225107 USB Drive. - HDD GURU FORUMS
To install and use the Phison MPALL (Mass Production Tool) for the PS2251-07 (PS2307)
controller, follow these steps. This utility is typically used to repair "Write Protected" errors, restore "unrecognized" drives, or reflash firmware. cdn.prod.website-files.com Prerequisites Identify Your Device : Use a tool like ChipGenius Flash Drive Information Extractor to confirm you have the Phison PS2251-07 (PS2307) controller and to note your NAND Flash-ID Download Software : Obtain the
distribution (e.g., v3.72, v5.03, or newer) from reputable repositories like FlashBoot.ru Obtain Firmware Files : You will need a Burner File (starting with Firmware File (starting with ) that match your NAND type. cdn.prod.website-files.com Installation & Configuration Steps Extract Files : Unzip the MPALL distribution to a folder on your PC. Open Configuration Utility MPParamEdit_F1.exe (or a similar from the folder). Basic Setup "Advance Setting" "New Setting" Controller Enter your device's (found earlier via ChipGenius). Assign Firmware "Burner File" field, select your "Firmware File" field, select your : You can often check "Auto ISP" to let the program attempt to select these automatically. Save Config : Save the settings as or similar in the same directory. Flashing the Drive : Launch the main executable (e.g., MPALL_F1_7F00_DL07_v503_0A.exe Connect Drive
: Plug in your USB drive. If it is "dead," you may need to put it into
(shorting specific pins on the chip) for it to be recognized.
to detect your drive. It should appear in one of the numbered boxes. to begin the mass production process. : This process will permanently erase all data on the drive. : Wait for the box to turn
(Success). If it turns red, an error code will be displayed for troubleshooting. If you need help finding the exact firmware file for your specific memory chip, let me know the AD DE 14 A7 42 4A ) found by ChipGenius. Phison MPALL Flash Drive Repair Guide | PDF - Scribd
Phison PS2251-07 (also known as PS2307) is a popular controller found in many USB 3.0 flash drives. When these drives become "Write Protected," "No Media," or fail to format, the Phison MPTool (Mass Production Tool) is the primary utility used to reflash the firmware and restore the device to factory settings.
This guide covers the safe installation and usage of the Phison PS2251-07 MPTool. 🛠️ Prerequisites Before Installation
Reflashing a controller is a high-risk procedure. Ensure you have the following ready:
ChipGenius or Flash Drive Information Extractor: Use these tools to confirm your controller is exactly PS2251-07 or PS2307.
Correct Firmware Files: MPTool requires .bin files (Burner and Firmware) specific to your NAND flash type (e.g., Toshiba, SanDisk, Hynix).
Windows Environment: These tools are designed for Windows (preferably Windows 7 or 10). Run them in Administrator Mode.
Backup: Flashing will securely erase all data on the USB drive. 📥 How to Install and Set Up Phison MPTool
The "installation" of Phison MPTool is usually a portable extraction process. Follow these steps to get started: 1. Extract the Software
Download the version of MPTool compatible with PS2251-07 (often found in packages labeled MPALL_F1_9000 or similar). Extract the ZIP folder to your desktop. Avoid running it directly from the ZIP. 2. Configure the MP.ini File
Before opening the application, you must configure the settings: Locate the file named MP.ini or Settins.ini in the folder. Open it with Notepad.
Under the [PenDriveID] section, ensure the VID and PID match your device (common Phison defaults are 0000 and 0000 or 13FE and 5200). 3. Run as Administrator Go to "Partition Setting" :
Right-click MPALL_F1_xxxx.exe and select Run as Administrator. If the program doesn't see your drive, try a USB 2.0 port, as USB 3.0 ports can sometimes cause detection issues during flashing. 🔄 Using MPTool to Flash PS2251-07 Once the tool is open, follow this workflow:
Update/Refresh: Click the "Update" button to let the tool scan your USB ports. Your drive should appear in one of the white boxes.
Setting: Click the "Setting" button. Select "New Setting" and click OK.
Controller Selection: In the configuration window, select PS2251-07 from the Controller dropdown. Firmware Loading: Burner: Select the .bin file starting with BN07. Firmware: Select the .bin file starting with FW07.
Save and Start: Save the settings to return to the main screen. Click Start.
Warning: Do not unplug the drive while the progress bar is moving. A "Green" box indicates success; a "Red" box indicates a firmware mismatch or hardware failure. ❓ Troubleshooting Common Errors
CT - 0x1042: This usually means the firmware file is incorrect for your specific NAND flash. Double-check your flash type in ChipGenius.
Drive Not Found: Try a different USB port or use a "Test Mode" (shorting pins on the controller), though this is only recommended for advanced users if the drive is totally bricked.
Read Only Error: Ensure you have toggled the "Low Level Format" option within the MPTool settings.
If you'd like to troubleshoot a specific error code or find the exact firmware version for your flash memory: Tell me the Flash ID from ChipGenius (e.g., AD3A14AB). Share the specific error code you're seeing in MPTool. Confirm your NAND type (TLC, MLC, or SLC).
Here’s a step-by-step guide to installing and using the MPTool (Mass Production Tool) for Phison PS2251-07 (PS2307) USB flash drive controllers.
⚠️ Important: Using the wrong firmware or settings can brick your USB drive. Double-check your controller model before proceeding.
MPTool does not require traditional installation.
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | 0x1042 | Firmware mismatch | You loaded the wrong .bin file. Find the correct FW for PS2251-07. | | 0x1106 | Bad driver | Reinstall Phison driver using DriverInstall.exe. | | 0x1112 | Low-level format required | Check "Erase All" in settings before starting. | | 0x3012 | Timeout / Bad block count | The drive has too many physical errors. Replace it. |
Always run antivirus on downloaded tools – some are flagged due to low-level disk access (false positive common).
Once, in a cluttered digital workspace, there was a USB drive powered by the Phison PS2251-07 (PS2307)
controller that had fallen into a "panic" state. It was no longer recognized by its owner’s computer, showing only as a ghost in Device Manager. To revive it, the owner had to embark on a quest to master the Phison MPALL (Mass Production Tool). Step 1: Gathering the Relics
The journey began with the gathering of essential tools. Using ChipGenius
(a common diagnostic tool), the owner confirmed the controller was indeed a
. Next, they searched the archives of USBDev.ru or FlashBoot to find two vital files: The Burner: A file typically named BN07*.BIN. The Firmware: A file typically named FW07*.BIN. Step 2: The Ritual of Installation
The owner unzipped the Phison MPALL distribution and carefully launched the executable (MPALL_F1_...exe) as an Administrator. With the flash drive connected, they pressed the Update button, watching for the tool to detect the drive's presence. Step 3: Drafting the Plan (Configuration)
Entering the Setting menu, the owner chose "Basic Adjustment" and "New Configuration". This opened a utility window where the parameters were carefully set: Controller: Set to .
Host Port: Set to USB 3.0 (or 2.0 depending on the hardware).
Flash Setting: They loaded the specific Burner and Firmware files they had found earlier. Step 4: The Final Flash
With the configuration saved, they returned to the main screen and took a deep breath. Pressing Start initiated the low-level format and firmware re-installation. A progress bar moved slowly—any interruption could "brick" the drive forever.
Finally, a Green light appeared in the tool. The "panic" was over. The drive was unplugged and reconnected, and there it was: a fully restored, empty, and functional 32GB drive, ready for a new life.
Do you have the Burner and Firmware files ready, or would you like help identifying the specific versions needed for your flash chip? Fix All flash drive problems by resetting it's software
To repair or reflash a flash drive with the Phison PS2251-07 (PS2307) controller, you generally need the Phison MPALL (Mass Production Tool) or UPTool utilities. 🛠️ Required Tools
Utility: Phison MPALL (standard) or UPTool (for low-quality flash or deep errors). Firmware Files: You need two specific .BIN files: Burner (BN): e.g., BN07V106M.BIN. Firmware (FW): e.g., FW07FF01V10210M.BIN.
Identification: Use ChipGenius to confirm your controller is exactly PS2251-07 and to find your Flash ID (FID). ⚡ Installation & Setup Steps Phison MPALL v5.13.0C - USBDev.ru
 |
Steff Joined: Oct-20-2016 |
...
