Warning: This method is technically a security exploit. Use it only on your property.
If you are locked out of your XMeye DVR, you can typically regain access by using the mobile app to scan a recovery QR code or by performing a physical hardware reset. Option 1: Mobile App Recovery (Best Method)
This is the most common method for modern XMeye-based systems.
Trigger the Reset Screen: On your DVR login interface, enter an incorrect password multiple times (usually 5) or click the "?" or "Forgot Password" icon next to the password box.
Access the QR Code: A window will appear showing one or more QR codes. Look for the one labeled "CAPTCHA" or related to password recovery. Use the XMeye App: Open the XMeye App on your smartphone.
Navigate to the Menu (upper left) and select "Find PWD" or "Forgot Password". Scan the QR code displayed on your monitor.
Enter the Reset Code: The app will generate a 6-digit Reset Code. Enter this code into the DVR's login screen to reset your password. Option 2: Physical Hardware Reset
If you cannot use the app or the QR code does not appear, you can reset the unit to factory defaults.
Locate the Reset Button: Open the DVR casing and look for a small push-button or two jumper pins on the motherboard.
Perform the Reset: While the DVR is powered on, press and hold the button for 10–15 seconds. reset password xmeye dvr best
Default Login: Once the unit reboots, try logging in with the default credentials. For many XMeye systems, the username is admin and the password is blank (leave it empty). Summary of Quick Fixes Requirement App Scan Phone with XMeye App + Same Network Most modern DVRs Default Login Fresh setups or after a hard reset Hard Reset Opening the DVR case Older models or if software reset fails Resetting XMeye Passwords (DVR/ NVR/ IP Camera)
Locked out of your surveillance system? It happens to the best of us. Whether you just moved into a new place or simply forgot a long-unused code, here are the most effective ways to regain access to your XMEye DVR. 1. The QR Code & App Method (Best for Modern DVRs)
If your DVR was made after July 2019, this is usually the smoothest path.
Trigger the Code: Enter any incorrect password 5 times in a row. A QR code icon should appear next to the password box.
Scan with XMEye: Open the XMEye app on your phone. Go to Menu > Find PWD > Scan the QR.
Verify: Ensure your phone is on the same Wi-Fi network as the DVR. Once scanned, the app will give you a 6-digit Reset Code to enter directly into the DVR interface. 2. The "Super Password" Strategy
For older units or those without QR options, a "Super Password" can act as a master key to reset everything.
Date-Based Codes: Many XMEye systems generate temporary passwords based on the current date displayed on your monitor.
Third-Party Tools: You can use mobile apps like CCTV Super Password (available on the Play Store) to generate these codes by selecting "XMEYE" or "Xiongmai Tech" and entering your device's date/time. 3. Hard Reset (The Nuclear Option) If software methods fail, look at the physical hardware. Warning: This method is technically a security exploit
Reset Button: Some models have a small button on the back or the motherboard. Use a paperclip to press and hold it for 10–15 seconds while the device reboots.
Default Login: After a hard reset, the username is usually admin and the password is blank (just leave it empty). 💡 Pro-Tip for the Future
Once you're back in, immediately set up Security Questions in the "Account" menu. It makes the next "oops" moment as simple as answering a question instead of hunting for master codes.
If you are locked out of your , the "best" reset method depends on your specific device's firmware version and physical access. Most modern XMEye systems prioritize app-based or QR code recovery over older hardware-based resets. 1. The QR Code & App Method (Best for Modern DVRs) If your DVR was made after , this is the standard and safest approach. Trigger the Code : Enter any incorrect password in a row. A prompt will appear with a QR code icon next to the password box. Use the App : Open the on your phone. Ensure your phone is on the same Wi-Fi network as the DVR. Scan for Reset (top-left) -> Scan the QR Enter Code : The app will generate a 6-digit verification code
. Enter this into the DVR’s login screen to reset the password. 2. Security Questions or "Forgot Password" If your login screen has a question mark (?) Forgot Password link, try these steps first: Security Questions
: Click the question mark and answer the pre-set security questions (e.g., birthday). If correct, you can immediately set a new password. Forgot Answer : If you don't know the answers, click Forgot Answer . This typically generates a CAPTCHA QR code you can scan with the Sannce Vision or XMEye app to get a temporary reset code. 3. Super Password (Date-Based)
For older systems without QR codes, "Super Passwords" are generated based on the system date shown on your monitor. Check the Date
: Look at the date (YYYY-MM-DD) displayed in the corner of your DVR screen. Generate/Request
: You can often find calculators online or contact technical support with the Serial Number and current System Date to receive a one-day-only master password. 4. Hardware Reset (Last Resort) If you are locked out of your XMeye
If software methods fail, you can physically reset the motherboard. Reset Button : Some DVRs have a small physical reset button inside or on the back. Hold it for 10-15 seconds while the device is powered on to restore factory defaults. CMOS Battery
: If there is no button, power off the device, open the case, and remove the silver coin battery (CR2032) for 30–60 seconds. : After rebooting, the username will be and the password field should be JustAnswer Common Default Credentials
If you've just reset your DVR, try these default factory settings: : [Blank] (Empty) or Resetting XMeye Passwords (DVR/ NVR/ IP Camera)
Success Rate: 70% | Difficulty: 3/10
Most official guides tell you to do this. It is annoying, but it is the safest way. You will need a PC or a smartphone with email access.
🔓 Forgot your #XMEye DVR password?
Here’s the best way to reset it in 60 seconds:
✅ Use the local monitor → Click "Forgot Password" ✅ Copy the 6-8 digit Security Code ✅ Use the official XMeye reset tool (email support) ✅ Avoid sketchy "crackers" – they steal your data.
RT to help a fellow CCTV owner! 📹🔁
Success Rate: 95% | Difficulty: 7/10
If Method 2 fails (or the manufacturer went out of business), this is the best solution for resetting an XMeye DVR password. The tool is called "Pass reset XMeye" or "CMS Client (Central Management System)."