| Problem | Likely Cause | ROK-Specific Fix | |---------|--------------|------------------| | Machine pulsates | Air in water line or kinked hose | Turn off, squeeze trigger for 30 seconds until flow is smooth | | Won't start (electric) | GFCI tripped or extension cord too long | Reset GFCI; plug directly into wall outlet | | Won't start (gas) | Old fuel or choke in wrong position | Drain gas; set choke to "closed" for cold start | | Low pressure | Clogged nozzle or inlet filter | Use nozzle cleaning tool (included) to clear debris | | Water leaking from pump | Over-tightened fittings or worn O-ring | Hand-tighten only; replace O-ring (part #ROK-OR-06) |
Many new users complain, "My ROK won't pick up soap!" Here is why: rok power washer instructions new
Failure to follow these steps can destroy the pump immediately. | Problem | Likely Cause | ROK-Specific Fix
NEVER run the power washer without water flowing through it. Run dry time >5 seconds can damage seals/pump. Many new users complain, "My ROK won't pick up soap
Note: The motor cycles on/off as you release/squeeze trigger – this is normal.
The instructions typically advise a 3-step assembly: Handle insertion, Hose connection, and Lance attachment.