Advanced wiping allows selective cleaning of individual partitions. This is essential for switching between different Android versions (e.g., KitKat to LineageOS 14.1 based on Nougat). The “Format Data” button is particularly important for removing encryption or preparing for a new ROM.
After Odin says PASS, the tablet will try to reboot into the stock Android system. Stock Android will overwrite TWRP if you let it boot fully.
To prevent this:
If you accidentally boot into Android, TWRP will be replaced by stock recovery. Simply repeat the flashing process.
Solution: Immediately after Odin PASS, boot into TWRP before Android loads. If Android boots, reflash TWRP and this time, uncheck ‘Auto Reboot’ in Odin. After flashing, manually reboot to recovery using the key combo.
TWRP 3.0.2-1 for SM-T560 is a specialized tool built around the quirks of the SC7730SE. Its key strengths are F2FS support, correct prodnv handling, and stable MTP. Its weaknesses are slow backups and no encryption support.
Do not use this on any other model – SM-T561 (3G), SM-T560NU (Marvell chipset), or SM-P550 (Exynos) will hard-brick.
The file Twrp-3.0.2-1-sm-t560.tar is a custom recovery image for the Samsung Galaxy Tab E 9.6 (Wi-Fi) SM-T560. Flashing this file allows you to replace the stock recovery with Team Win Recovery Project (TWRP), enabling you to install custom ROMs (like LineageOS), back up your entire system, and root the tablet. How to Install TWRP on SM-T560
Installing this custom recovery requires a Windows PC and the official Samsung flashing tool, Odin. 1. Prerequisites
Drivers: Install the Samsung USB Drivers on your PC so it recognizes your tablet.
Enable USB Debugging: Go to Settings > About tablet, tap the Build number seven times until "Developer mode" is on. Then, in Developer options, enable USB Debugging. Odin Tool: Download and extract Odin v3.12 or newer. 2. Flash Using Odin Twrp-3.0.2-1-sm-t560.tar [FREE]
Guide to install TWRP 3.0.2-1 recovery on Samsung Galaxy Tab 3 (SM-T560) using Twrp-3.0.2-1-sm-t560.tar file. 52.72.90.182
Custom Recovery for the Samsung Galaxy Tab E: A Guide to TWRP 3.0.2-1
If you are looking to unlock the full potential of your Samsung Galaxy Tab E 9.6 (SM-T560), the file Twrp-3.0.2-1-sm-t560.tar is your gateway. Team Win Recovery Project (TWRP) is the industry standard for custom recoveries, providing a touch-based interface that replaces the restrictive stock recovery provided by Samsung.
Installing this specific .tar file allows you to bypass factory limitations, enabling root access, custom ROM installations, and full system backups. Why Use TWRP 3.0.2-1?
The SM-T560 is a reliable budget tablet, but its software often feels dated. TWRP 3.0.2-1 was a milestone release that introduced a fully redesigned UI and improved decryption support. For this specific hardware, it remains one of the most stable versions for:
Nandroid Backups: Create a perfect snapshot of your entire tablet (OS, apps, and data) so you can revert if a mod goes wrong.
Flashing Custom ROMs: Move beyond Android 4.4 or 5.0 to more modern, optimized versions of Android (like LineageOS).
Rooting: Easily flash SuperSU or Magisk binaries to gain administrative control.
Partition Management: Fix file system errors or wipe specific caches that the standard recovery cannot access. Prerequisites Before Flashing Twrp-3.0.2-1-sm-t560.tar
Before you download and install Twrp-3.0.2-1-sm-t560.tar, ensure you have the following ready:
Windows PC: You will need a computer to run the flashing tool.
Odin3: This is the specific software used to flash .tar files to Samsung devices. Samsung USB Drivers: Ensure your PC recognizes the tablet.
Battery Charge: Maintain at least 50% battery to prevent a shutdown during the process.
Enable OEM Unlocking: Go to Settings > Developer Options and toggle OEM Unlock to "On." (If you don't see Developer Options, tap "Build Number" seven times in About Tablet). How to Install Twrp-3.0.2-1-sm-t560.tar
Follow these steps carefully to flash the recovery onto your SM-T560: Step 1: Put the Tablet into Download Mode
Turn off your device completely. Press and hold the Volume Down + Home + Power buttons simultaneously. When a warning screen appears, press Volume Up to enter Download Mode. Step 2: Configure Odin
Open Odin3 on your PC and connect your tablet via a high-quality USB cable. The "ID:COM" box in Odin should turn blue or yellow, indicating a successful connection. Step 3: Load the Recovery File
Click on the AP (or PDA) button in Odin. Navigate to your folder and select the Twrp-3.0.2-1-sm-t560.tar file. Step 4: Check Odin Settings
Go to the "Options" tab in Odin. Ensure Auto Reboot and F. Reset Time are checked. Do not check "Re-Partition." Step 5: Start the Flash
Click the Start button. The process usually takes less than a minute. Once finished, Odin will show a green "PASS!" message, and your tablet will reboot. Troubleshooting Common Issues
Bootloops: If the device hangs at the logo, try booting into recovery immediately after flashing by holding Volume Up + Home + Power.
Odin "Fail": This usually happens due to a bad USB cable or port. Try a different USB 2.0 port on your computer.
Recovery Reverted to Stock: Samsung devices often "overwrite" custom recoveries on the first boot. To prevent this, uncheck "Auto Reboot" in Odin, flash the file, pull the battery (or force a shutdown), and manual boot straight into TWRP. Conclusion
The Twrp-3.0.2-1-sm-t560.tar recovery is the essential first step for any SM-T560 owner looking to modernize their device. Once installed, the world of custom kernels, debloated firmware, and advanced system tweaks is wide open.
The file "Twrp-3.0.2-1-sm-t560.tar" is a custom recovery image designed specifically for the Samsung Galaxy Tab E 9.6 (SM-T560) Go to product viewer dialog for this item.
. It is used to replace the factory recovery system to allow for advanced tasks like rooting, installing custom ROMs, and creating full device backups. Key Details & Functionality
Purpose: TWRP (Team Win Recovery Project) is an open-source, touch-based recovery environment. Compatibility: This specific version is built for the (Wi-Fi only) model. Using it on other variants, like the Go to product viewer dialog for this item. , may not work or could cause issues.
File Format: The .tar extension indicates it is intended to be flashed using Odin, a specialized Samsung firmware installation tool for Windows. Typical Installation Process If you accidentally boot into Android, TWRP will
Installing this file usually follows these steps as documented in community guides on XDA Developers or TWRP.me:
Enable Developer Options: Tap "Build Number" seven times in settings, then enable USB Debugging and OEM Unlocking.
Download Mode: Power off the tablet and boot into "Download Mode" by holding the Home + Volume Down + Power buttons.
Flash with Odin: Connect the tablet to a PC, open the Odin tool, and select the .tar file in the AP (or PDA) slot to flash.
Boot into Recovery: After flashing, hold Home + Volume Up + Power to enter the TWRP interface. Why Use It?
Here’s a technical write-up based on the file twrp-3.0.2-1-sm-t560.tar.
The Twrp-3.0.2-1-sm-t560.tar file is your gateway to transforming a dated Samsung tablet into a customizable, debloated, and high-performance device. Whether you want to root for ad-blocking and automation, install a lightweight custom ROM to improve battery life and speed, or simply have a full system backup before experimenting, TWRP is indispensable.
While Samsung no longer provides updates for the SM-T560, the custom development community has kept the device relevant through recoveries and ROMs. By following this guide carefully, you can safely install TWRP and unlock the full potential of your Galaxy Tab A 9.7 (2016).
Remember: Flashing custom software voids your warranty and carries inherent risks. Always double-check model numbers, keep backups, and follow community advice. If you succeed, consider thanking the developers on XDA who built and maintained this TWRP version for free.
Have questions or run into an issue? Visit the XDA Developers forum for the SM-T560, search for “TWRP 3.0.2-1,” and join the discussion. Happy flashing!
Twrp-3.0.2-1-sm-t560.tar is a custom recovery image designed for the Samsung Galaxy Tab E 9.6 (SM-T560) file is specifically formatted to be flashed using , the standard firmware flashing tool for Samsung devices. Installation Guide for SM-T560
To install this custom recovery on your Samsung Galaxy Tab E, follow these steps: Preparation Install the necessary Samsung USB drivers on your PC. USB Debugging OEM Unlock
(if available) in the Developer Options of your tablet's settings. Enter Download Mode Power off your tablet. Press and hold Volume Down + Home + Power buttons simultaneously until a warning screen appears. to confirm and enter Download Mode. Flash with Odin
Open Odin on your PC and connect your tablet via USB; a blue "ID:COM" box should appear. button and select the Twrp-3.0.2-1-sm-t560.tar In the "Options" tab, ensure Auto Reboot if you want to boot directly into recovery after flashing. First Boot to TWRP
Once Odin shows "PASS," manually reboot into recovery by holding Volume Up + Home + Power until the TWRP logo appears. Key Features of TWRP 3.0.2-1 Touch Interface
: A fully touch-driven recovery environment, making it much easier to navigate than the stock recovery. Backup and Restore
: Allows you to create "Nandroid" backups—a complete snapshot of your tablet's current system, data, and settings. Flash Custom Software
: Necessary for installing custom ROMs, kernels, or rooting tools like Magisk. Advanced Wiping
: Offers granular control over wiping specific partitions like Cache, Data, or System. Common Troubleshooting Solution: Immediately after Odin PASS, boot into TWRP
: If the device fails to boot, ensure you are using the correct version for the
(Wi-Fi model). This file is not compatible with the SM-T561 (3G model). Mount Errors
: If TWRP cannot access your files, you may need to "Repair or Change File System" under the Wipe menu to fix partition mounting issues. custom ROMs compatible with the SM-T560 to use with your new recovery?
How to Install TWRP Recovery on Any Samsung Device (2026 Guide)
Twrp-3.0.2-1-sm-t560.tar is a custom recovery image designed for the Samsung Galaxy Tab E 9.6 (SM-T560). This specific .tar file is used to replace the stock Samsung recovery with the Team Win Recovery Project (TWRP), a powerful touch-based interface that allows users to perform advanced tasks such as rooting, creating full system backups (Nandroid), and installing custom ROMs. Key Features of TWRP 3.0.2-1
This version brought significant improvements over older recovery environments:
Fully Touch-Driven Interface: Unlike stock recoveries that require volume buttons for navigation, TWRP features a modern, user-friendly touch GUI.
Comprehensive Backup & Restore: Allows for "Nandroid" backups, which save the entire state of your tablet's software, including data and settings.
Advanced Partition Management: Users can wipe specific partitions like Cache, Dalvik, and System without losing their personal files.
Built-in File Manager: Enables moving, deleting, or editing system files directly from recovery. Prerequisites for Installation
Before attempting to flash Twrp-3.0.2-1-sm-t560.tar, ensure the following:
Correct Model: This file is specifically for the SM-T560 (Wi-Fi variant). Flashing it on other models, like the SM-T561, may cause a brick.
Drivers: Download and install the Samsung USB Drivers on your Windows PC.
Odin Tool: You will need the Odin Flash Tool (v3.10.6 or newer recommended).
OEM Unlocking: Go to Settings > Developer Options and enable USB Debugging and OEM Unlock. How to Install Twrp-3.0.2-1-sm-t560.tar
The most reliable method for Samsung devices is using the Odin desktop application.
This specific build is notable because the SM-T560 (codename: goyawifi) is a Spreadtrum (Unisoc) SC7730SE device, not a Qualcomm or Exynos chip. This makes its TWRP build unique in terms of partitioning, kernel drivers, and flashing behavior.
TWRP 3.0.2-1 on the SM-T560 is not perfect. Users have reported: