Before discussing custom firmware, let’s clarify what “V380” actually means. V380 is not a single manufacturer; it is a reference to the V380 Pro app (and its predecessor, V380). This app was designed to work with a specific ecosystem of low-cost IP cameras powered mostly by Ingenic SoCs (System on Chips) —specifically the T-series (T20, T21, T31) and sometimes XM (XiongMai) chips.
The stock firmware on these cameras is a minimal Linux system with a proprietary P2P (Peer-to-Peer) client that routes your video stream through Chinese servers. While convenient for plug-and-play setups, it lacks standard protocols like RTSP, RTMP, and ONVIF in many older or cheaper models. v380 custom firmware
There isn’t a single “V380 Custom Firmware” installer. Instead, several open-source projects fill this gap. As of 2024-2025, the most relevant are: Backup Original Firmware : If possible, dump the
If the above process sounds intimidating, you have alternatives without going full custom: For older V380 cameras based on the XM
Backup Original Firmware: If possible, dump the original firmware. This can often be done through the device's web interface or by using a tool specific to your SoC. Having a backup can be a lifesaver.
For older V380 cameras based on the XM (XiongMai) platform, there are legacy hacks that enable telnet and FTP access. However, these are not recommended for new projects due to outdated kernels and security vulnerabilities.
| Problem with Stock Firmware | Custom Firmware Solution | |-----------------------------|--------------------------| | Cloud dependency (V380 servers) | Local control only | | No standard RTSP/ONVIF | Enable RTSP for Blue Iris, VLC, Home Assistant | | Forced app usage | Web interface, MQTT, or standard IP protocols | | Unknown background traffic | Network transparency and firewall rules | | Hardcoded passwords/backdoors | Replace with secure credentials |