Wake On Lan Anydesk Hot Official

Prerequisites:

AnyDesk WoL methods:

Typical steps (concrete):

Note: Exact AnyDesk UI steps vary by version—if unavailable, use a separate WoL method (VPN, router, Pi).

Options:

Security note: exposing direct WoL ports to WAN is less secure; prefer relay/VPN/secure API.

| Problem | Likely Cause | Solution | |--------|--------------|----------| | PC doesn’t wake after sending packet | Fast Startup enabled | Disable Fast Startup in Windows | | WoL works on LAN but not via hotspot | No VPN or port forwarding | Use smart plug or VPN | | AnyDesk shows “Wake up” but not working | Router blocks broadcast | Forward UDP 9 to PC’s IP | | Laptop wakes then sleeps again | Battery settings | Change “Sleep after” to Never on AC | | Mobile hotspot can’t send WoL | Different subnet | Use VPN to bridge networks |

AnyDesk utilizes a "relay" method for Wake-on-LAN. If you want to turn on Computer A (the target) from Computer B (the client), AnyDesk generally requires a third device, Computer C, to be awake on the same local network as Computer A.

When you send the WoL command from Computer B, it travels over the internet to Computer C. Computer C then broadcasts the "Magic Packet" locally to wake up Computer A. wake on lan anydesk hot

If your router has no WoL feature, you need a tiny device on your home network that stays on 24/7 (a Raspberry Pi, an old Android phone, or even a second low-power PC).

Example using a Raspberry Pi:

1. Prepare the Target Computer (BIOS/UEFI):

2. Prepare the Target Computer (OS Settings): Prerequisites:

3. Configure AnyDesk:

Without WoL, your remote PC must stay awake 24/7 — wasting electricity, reducing hardware lifespan, and posing security risks. With WoL + AnyDesk:

AnyDesk has a native Wake on LAN feature (available in free and paid versions), but it works only if:

The "hot" element (mobile hotspot) solves the internet WoL challenge. AnyDesk WoL methods: