Xmtk-9000 User Manual May 2026

| Parameter | Value | |-----------|-------| | Input accuracy | ±0.1% of span + 1 digit | | Sampling rate | 10 Hz | | Relay outputs | 3x SPST, 3A @ 250VAC resistive | | SSR output | 24 VDC, 20 mA max | | Analog output (optional) | 0-10 VDC or 4-20 mA, 500Ω load | | Display | 2-line x 20 character VFD, adjustable brightness | | Power consumption | 12 VA max | | Operating altitude | Up to 2000 m (6560 ft) | | Agency approvals | UL 61010-1, CSA C22.2, EN 61326-1 |

| Terminal Block | Signal | Description | |----------------|--------|------------------------------| | 1 (AI1+) | IN+ | Analog input 1 positive | | 2 (AI1-) | IN- | Analog input 1 negative | | ... | ... | ... | | 9 | V- | Power ground / DC common | | 10 | V+ | +24V DC or L (AC hot) | | 11 | PE | Protective earth | | 17 (DO1) | NO | Digital output 1 (normally open) | | 18 (DO1 COM) | COM | Common for DO1 |

Full 24-page wiring appendix available online.

When you first energize the XMTK-9000, the screen will cycle through a self-test sequence. Follow this XMTK-9000 user manual procedure:

After confirmation, the main operation screen appears: PV (Process Value) in large digits, SV (Set Value) in smaller digits below.

Safety: Turn output off before connecting/disconnecting sensitive circuits.

The XMTK-9000 is rated for panel-mount installation (IP65 front face). Cut a 184mm x 112mm hole in your panel. Insert the unit and secure with the included brackets. Ensure 50mm clearance behind the unit for ventilation.

CSV column header example:

Timestamp (UTC), PV (°C), SV (°C), Out1 (%), Alarm Status
2025-05-12 14:23:05, 120.3, 120.0, 48.2, AL2

Tip: Do not unplug USB during export – the XMTK-9000 will temporarily freeze until transfer complete.

If you want, I can: generate a printable PDF formatted manual, adapt this guide for a specific confirmed feature list, or create step-by-step procedures for a particular measurement. xmtk-9000 user manual

is an intelligent temperature controller primarily used for precision heating in plastic pipe welding machines

and hot melt adhesive equipment. It utilizes microprocessor-based PID control to maintain stable temperatures within a range of 0–300°C

(though some variants support up to 400°C or higher depending on the sensor type). XMTK-9000 Technical Specifications Key performance data sourced from the XMTK-9000 Operation Manual and merchant listings like Hayes Industrial Solutions Temperature Range: 0–300°C (Standard for welding). Power Supply: Available in 110V or 220V AC (85–242V range). Measurement accuracy of ±0.5% Full Scale with a 0.5-second sampling cycle. Input Types:

Supports standard TC (Thermocouple) and RTD (PT100/CU50) signals. Output Control:

Relay output (250VA capacity) or voltage pulse for SSR (Solid State Relay).

Dual LED display showing PV (Measured Value) and SV (Set Value). Quick Operation Guide Setting the Temperature (SV):

Use the Up/Down arrow keys on the front panel to adjust the desired temperature value shown in the bottom window. Accessing Parameters: Press and hold the SET key for 3 seconds

to enter the configuration menu. You can then toggle through parameter codes (1–24) to adjust internal logic like PID constants. Unlocking Settings: If you cannot change values, check parameter 22 ( ). Set it to to unlock all operations. Auto-Tuning:

The device features a self-conditioning function to automatically calculate the best PID settings for your specific heating load. Safety & Maintenance | Parameter | Value | |-----------|-------| | Input

The is an intelligent, multi-functional temperature controller designed for high-precision industrial applications, particularly in plastic pipe welding and hot melt adhesive machines. This series utilizes micro-processing units and Surface Mount Technology (SMT) to deliver stable performance in a compact form factor. Technical Specifications

is built to operate in demanding environments while maintaining strict accuracy. Specification Input Power AC 85–242V, 50/60Hz Accuracy ±0.5% Full Scale (FS) Temperature Range

0 to 300°C (standard for welding); overall display -1999 to 1999 Input Signals Thermocouples (K, E, J, S, etc.) and RTDs (Pt100, Cu50) Display Dual-row LED (PV in red, SV in green) Control Outputs Relay (250V AC/3A) or Voltage Pulse (0–12V for SSR) Environment 0 to 50°C, humidity ≤ 85% RH, non-corrosive Operating Instructions

The controller interface consists of a SET key and directional keys for parameter adjustment. Setting the Target Temperature (SV): Press the SET key once. The SV display will begin to flash.

Use the < (shift), ∧ (up), and ∨ (down) keys to adjust the value to your desired temperature. Press SET again to save and return to normal operation. Accessing Parameter Settings:

Press and hold the SET key for approximately 3 seconds to enter the secondary configuration menu.

This menu allows you to adjust PID constants, alarm levels, and data lock protections. Auto-Tuning (AT):

To optimize control for a new system, activate the "AT" function. The controller will automatically calculate the best PID parameters for your specific heating load. Wiring and Installation

Proper installation is critical for safety and to prevent electrical interference. | Terminal Block | Signal | Description |

The is an industrial intelligent temperature controller primarily used for high-precision regulation in plastic pipe welding machines and hot melt adhesive systems. If you are looking for guidance on its operation, the user manual typically covers wiring for legacy systems, calibration for different heating elements, and troubleshooting for industrial environments. Key Technical Specifications

According to documentation from CNC Electric and other industrial suppliers, the device features:

Measurement Range: Typically 0–300°C for plastic pipe welding, though some variants support up to 400°C. Accuracy: full scale with a sampling cycle of 0.5 seconds.

Input Compatibility: Supports various Thermocouples (TC) and RTD standard signals (like PT100/CU50).

Control Outputs: Options include Relay output (250VA capacity) or Voltage pulse output (0-12V) suitable for Solid State Relays (SSR). Essential Manual Functions

The XMTK-9000 Instruction Manual details several critical parameters for setup: PID Control: Includes settings for the Proportional band ( ), Integration time ( ), and Differential time ( ) to manage temperature overshoot and stability.

Self-Diagnosis: The unit includes intelligent self-conditioning and self-diagnosis features to simplify initial setup.

Key Lock: A safety feature (Setting 0 or 1) allows you to lock all parameters except the set control point to prevent accidental changes. Installation & Maintenance Tips